*** Welcome to piglix ***

Phosphane

Phosphine
Phosphine
Phosphine-3D-balls.png
Phosphine-underside-3D-vdW.png
Names
IUPAC name
Phosphane
Other names
Phosphamine
Phosphorus trihydride
Phosphorated hydrogen
Identifiers
7803-51-2 YesY
3D model (Jmol) Interactive image
ChEBI CHEBI:30278 YesY
ChemSpider 22814 YesY
ECHA InfoCard 100.029.328
EC Number 232-260-8
287
PubChem 24404
RTECS number SY7525000
UN number 2199
Properties
PH3
Molar mass 33.99758 g/mol
Appearance colorless gas
Odor faint, fish-like or garlic-like
Density 1.379 g/l, gas (25 °C)
Melting point −132.8 °C (−207.0 °F; 140.3 K)
Boiling point −87.7 °C (−125.9 °F; 185.5 K)
31.2 mg/100 ml (17 °C)
Solubility soluble in alcohol, ether, CS2
slightly soluble in benzene, chloroform, ethanol
Vapor pressure 41.3 atm (20°C)
2.144
Viscosity 1.1 x 10−5 Pa s
Structure
Trigonal pyramidal
0.58 D
Thermochemistry
210 J·mol−1·K−1
5 kJ·mol−1
Hazards
Safety data sheet ICSC 0694
Extremely Flammable F+ (F+)
Very Toxic T+ (T+)
Corrosive C (C)
Dangerous for the Environment (Nature) N (N)
R-phrases R12, R17, R26, R34, R50
S-phrases (S1/2), S28, S36/37, S45, S61, S63
NFPA 704
Flammability code 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g., propane Health code 4: Very short exposure could cause death or major residual injury. E.g., VX gas Reactivity code 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g., phosphorus Special hazards (white): no codeNFPA 704 four-colored diamond
Flash point flammable gas
38 °C (100 °F; 311 K) see text
Explosive limits 1.79% – 98%
Lethal dose or concentration (LD, LC):
LD50 (median dose)
3.03 mg/kg (rat, oral)
11 ppm (rat, 4 hr)
1000 ppm (mammal, 5 min)
270 ppm (mouse, 2 hr)
100 ppm (guinea pig, 4 hr)
50 ppm (cat, 2 hr)
2500 ppm (rabbit, 20 min)
1000 ppm (human, 5 min)
US health exposure limits (NIOSH):
PEL (Permissible)
TWA 0.3 ppm (0.4 mg/m3)
REL (Recommended)
TWA 0.3 ppm (0.4 mg/m3) ST 1 ppm (1 mg/m3)
IDLH (Immediate danger)
50 ppm
Related compounds
Other cations
Ammonia
Arsine
Stibine
Bismuthine
Related compounds
Trimethylphosphine
Triphenylphosphine
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY  (what is YesYN ?)
Infobox references

Phosphine (IUPAC name: phosphane) is the compound with the chemical formula PH3. It is a colorless, flammable, toxic gas and pnictogen hydride. Pure phosphine is odorless, but technical grade samples have a highly unpleasant odor like garlic or rotting fish, due to the presence of substituted phosphine and diphosphane (P2H4). With traces of P2H4 present, PH3 is spontaneously flammable in air, burning with a luminous flame. Phosphines are also a group of organophosphorus compounds with the formula R3P (R = organic derivative). Organophosphines are important in catalysts where they complex to various metal ions; complexes derived from a chiral phosphine can catalyze reactions to give chiral, enantioenriched products.

Philippe Gengembre (1764-1838), a student of Lavoisier, first obtained phosphine in 1783 by heating phosphorus in an aqueous solution of potash (potassium carbonate).

Perhaps because of its strong association with elemental phosphorus, phosphine was once regarded as a gaseous form of the element, but Lavoisier (1789) recognised it as a combination of phosphorus with hydrogen and described it as phosphure d'hydrogène (phosphide of hydrogen).

In 1844, Paul Thénard, son of the French chemist Louis Jacques Thénard, used a cold trap to separate diphosphine from phosphine that had been generated from calcium phosphide, thereby demonstrating that P2H4 is responsible for spontaneous flammability associated with PH3, and also for the characteristic orange/brown color that can form on surfaces, which is a polymerisation product. He considered diphosphine’s formula to be PH2, and thus an intermediate between elemental phosphorus, the higher polymers, and phosphine. Calcium phosphide (nominally Ca3P2) produces more P2H4 than other phosphides because of the preponderance of P-P bonds in the starting material.


...
Wikipedia

...