*** Welcome to piglix ***

3-pentanone

3-Pentanone
Skeletal formula of 3-pentanone
Ball-and-stick model of 3-pentanone
Names
Preferred IUPAC name
Pentan-3-one
Other names
Diethyl ketone, diethylketone, 3-pentanone, dimethyl acetone, propione, metacetone, methacetone, ethyl ketone
Identifiers
96-22-0 YesY
3D model (Jmol) Interactive image
Abbreviations DEK
ChEBI CHEBI:87755 N
ChEMBL ChEMBL45315 YesY
ChemSpider 7016 YesY
ECHA InfoCard 100.002.265
UNII 9SLZ98M9NK YesY
Properties
C5H10O
Molar mass 86.13 g·mol−1
Appearance Colorless liquid
Odor Acetone-like
Density 0.815 g/cm3
Melting point −39 °C (−38 °F; 234 K)
Boiling point 100 to 102 °C (212 to 216 °F; 373 to 375 K)
Solubility in other solvents water: 50 g/L (20 °C), organic solvents
Vapor pressure 35 mmHg (25°C)
-58.14·10−6 cm3/mol
Hazards
Flash point 12.78 °C (55.00 °F; 285.93 K)
425 °C (797 °F; 698 K)
Explosive limits 1.6%-6.4%
US health exposure limits (NIOSH):
PEL (Permissible)
none
REL (Recommended)
TWA 200 ppm (705 mg/m3)
IDLH (Immediate danger)
N.D.
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N  (what is YesYN ?)
Infobox references

3-Pentanone (also known as diethyl ketone) is a simple, symmetrical dialkyl ketone. It is a colorless liquid ketone with an odor like that of acetone. It is soluble in about 25 parts water, but miscible with organic solvents. It is mainly used as a solvent in paint and a precursor to vitamin E. Two related and more important ketones are 2-pentanone and methyl isopropyl ketone.

3-Pentanone is produced by ketonic decarboxylation of propanoic acid using metal oxide catalysts:

in the laboratory, the reaction cain be conducted in a tube furnace.

It can also be prepared by combining ethylene, CO, and H2. When the reaction is catalyzed by dicobalt octacarbonyl, waster can be used as a source of hydrogen. A proposed intermediate is the ethylene-propionyl species [CH3C(O)Co(CO)3(ethylene)] which undergoes a migratory insertion to form [CH3COCH2CH2Co(CO)3]. The required hydrogen arises from the water shift reaction. For details, see

If the water shift reaction is not operative, the reaction affords a polymer containing alternating carbon monoxide and ethylene units. Such aliphatic polyketones are more conventionally prepared using palladium catalysts.

The TLV value for 3-pentanone is 200 ppm (705 mg/m3). 3-pentanone can be hazardous if it comes in contact with the skin or eyes, and can cause irritation of the skin and redness, watering, and itching of the eyes. This chemical can also cause nervous system or organ damage if ingested. Although considered stable, 3-pentanone is extremely flammable if exposed to flame, sparks, or another source of heat. For safety, it should be stored in a flammable materials cabinet away from heat or sources of ignition, preferably in a cool, well-ventilated area.


...
Wikipedia

...