*** Welcome to piglix ***

Holden HK

Holden HK
1968-69 HK Kingswood==.JPG
Holden HK Kingswood Sedan
Overview
Manufacturer Holden (General Motors)
Also called Holden Belmont
Holden Kingswood
Holden Premier
Holden Brougham
Holden Monaro
Chevrolet Kommando (South Africa)
Chevrolet El Camino (South Africa)
Production January 1968 to May 1969
Body and chassis
Class Mid-size
Body style 4-door sedan
5-door station wagon
2-door coupé
2-door coupé utility
2-door panel van
Layout FR layout
Powertrain
Engine
Transmission 3-/4-speed manual
2-speed "Powerglide" automatic
Dimensions
Wheelbase 111.0 inches (2819 mm)
Length
  • 184.8 in (4,694 mm) (Sedan/Station)
  • 192.1 in (4,880 mm) (Brougham)
Width 71.4 inches (1814 mm)
Height sedans: 55.6 inches (1412 mm)
Curb weight Monaro GTS 186S: 2946 lb (1336 kg)
Chronology
Predecessor Holden HR
Successor Holden HT

The Holden HK series is an automobile which was produced by Holden in Australia from 1968 to 1969. Introduced in January 1968, the HK range progressively replaced the Holden HR series which had been in production since 1966. HK models were both larger and heavier than their predecessors and the range would ultimately include thirteen different models against the eight of the HR range. The Holden HK was marketed under Belmont, Kingswood, Premier, Brougham and Monaro model names.

The HK series was initially offered in three trim levels, each available in four-door sedan and five-door station wagon body styles. Sedans and wagons were marketed as sedans and station sedans respectively.

The Belmont and Kingswood model names were new for the HK series, replacing the Standard and Special names which had been used by Holden since 1953. The Premier nameplate was retained for the top-of-the-line model, which now featured four headlights and a unique roofline to differentiate it further from its lesser siblings. 161-cubic-inch (2.6-litre) and 186-cubic-inch (3.0-litre) inline six-cylinder engines were carried over from the HR series; however, a 307-cubic-inch (5.0-litre) Chevrolet V8 was now offered as an option on all models, this being the first time that any Holden had been available with a V8 engine.

In March 1968 the HK range was expanded with the release of two coupe utilities and a panel van variant replacing the existing HR series commercial models.

Prior to the introduction of the HK models, Holden’s commercial vehicles had been marketed simply as the Holden utility and the Holden panel van.

July 1968 saw the release of an additional HK sedan and three coupe models:

The Brougham featured a greater level of luxury than the Premier, which had been the top of the range Holden since the introduction of the nameplate in 1962. The Brougham also featured an overall length 200 millimetres (8 in) greater than the other HK sedans, although this extra length was added to the body only, while the wheelbase remained unchanged at 111 inches. It was equipped with the 307 cubic inch V8 engine as standard. The Monaro models were 2-door coupes, the first such vehicles to be offered by Holden and the Monaro GTS 327 featured a 327 cu in (5.4 L) Chevrolet V8 engine which was not available in any other Holden model but was available in the larger GMH assembled Chevrolet Impala and Pontiac Parisienne.


...
Wikipedia

...