Holden HT
| Holden HT | |
|---|---|
Holden Kingswood sedan
|
|
| Overview | |
| Manufacturer | Holden (General Motors) |
| Also called | Holden Belmont Holden Kingswood Holden Premier Holden Brougham Holden Monaro Chevrolet El Camino (South Africa) |
| Production | May 1969 to July 1970 |
| Body and chassis | |
| Class | Mid-size |
| Body style | 4-door sedan 5-door station wagon 2-door coupé 2-door coupé utility 2-door panel van |
| Layout | FR layout |
| Powertrain | |
| Engine | 161 cu in (2.6 L) 6-cyl 186 cu in (3.0 L) 6-cyl 253 cu in (4.1 L) V8 307 cu in (5.0 L) V8 308 cu in (5.0 L) V8 350 cu in (5.7 L) V8 |
| Transmission | 3spd manual 4spd manual 2spd "Powerglide" automatic |
| Dimensions | |
| Wheelbase | 111.0 inches (2819 mm) |
| Length | sedans: 184.8 inches (4694 mm) |
| Width | 71.8 inches (1824 mm) |
| Height | sedans: 55.6 inches (1412 mm) |
| Curb weight | Belmont: 2814 lb (1276 kg) |
| Chronology | |
| Predecessor | Holden HK |
| Successor | Holden HG |
The Holden HT series is a range of automobiles which was produced by Holden in Australia between 1969 and 1970.
Holden HT Belmont, Kingswood and Premier models were introduced in May 1969, replacing their Holden HK series equivalents which had been in production since 1968. HT Brougham and Monaro models followed in June 1969. Noticeable changes from the HK series included new grilles, new taillights, flatter rear flanks and a wider back window. Other changes included increased track width, revised suspension, a new instrument panel and synchromesh on all forward gears on manual gearbox models.
The mainstream HT series was offered in four-door sedan and five-door station wagon body styles in three trim levels
The Brougham, which used a body with an extended boot, was available in one model only.
The Monaro was offered in three two-door coupe models
Commercial vehicle derivatives were available in two-door coupe utility and two-door panel van body styles in two trim levels.
Holden Kingswood sedan
Holden Kingswood wagon
Holden Premier sedan
Holden Premier sedan
Holden Brougham sedan
Holden Brougham sedan
Holden Monaro
Holden Monaro
Holden Monaro GTS
Holden Monaro GTS 350
Holden Belmont sedan
Holden Belmont sedan
Holden Belmont wagon
Holden Belmont panel van
The 161-cubic-inch (2.6-litre) and 186-cubic-inch (3.0-litre) six-cylinder engines were carried over from the HK range. Australian manufactured 253-cubic-inch (4.2-litre) and 308-cubic-inch (5.0-litre) V8 engines were new, replacing the imported 307-cubic-inch (5.0-litre) V8s. Initially the 308 was only fitted to the Brougham, and existing stocks of the imported 307 were used in other models. Once these supplies were exhausted, the 308 V8 was made available as an option across the HT range. The 327-cubic-inch (5.3-litre) Chevrolet V8 that had powered the HK Monaro GTS 327 was replaced by a 350-cubic-inch (5.8-litre) Chevrolet V8 in the newly introduced HT Monaro GTS 350 model. Three-speed manual, four-speed manual and two-speed "Powerglide" automatic transmissions were offered.
A smaller, 2,130 cc (130 cu in) version of Holden's inline-six Red motor ("130 HC") was available for export markets. It produced 90 hp (67 kW) at 4400 rpm and was meant for higher octane fuel.
...
Wikipedia