USS Chicago in 1891
|
|
History | |
---|---|
United States | |
Name: |
|
Namesake: |
|
Ordered: | 3 March 1883 |
Awarded: | 26 July 1883 |
Builder: | John Roach & Sons, Chester, Pennsylvania |
Cost: | $889,000 (contract price of hull and machinery) |
Laid down: | 29 December 1883 |
Launched: | 5 December 1885 |
Sponsored by: | Edith Cleborne |
Commissioned: | 17 April 1889 |
Decommissioned: | 30 September 1923 |
Renamed: | Alton 16 July 1928 and reclassified IX-5 |
Reclassified: |
|
Identification: |
|
Fate: |
|
General characteristics (as built) | |
Type: | Protected cruiser |
Displacement: | 4,500 long tons (4,600 t) |
Length: | |
Beam: | 48 ft 3 in (14.71 m) |
Draft: | 19 ft (5.8 m) |
Installed power: | 14 × 100 psi (690 kPa) coal-fired boilers |
Propulsion: |
|
Sail plan: | Schooner |
Speed: | 14 kn (16 mph; 26 km/h) |
Capacity: | 830 short tons (750 t) of coal |
Complement: | 45 officers and 356 enlisted men |
Armament: |
|
Armor: |
|
General characteristics (1895 & 1902 rebuild) | |
Displacement: | 5,000 long tons (5,100 t) |
Installed power: |
|
Propulsion: |
|
Speed: | 18 knots (33 km/h; 21 mph) (Speed on Trial) |
Armament: |
|
The first USS Chicago (later CA-14) was a protected cruiser of the United States Navy, the largest of the original three authorized by Congress for the "New Navy". One of the U.S. Navy's first four steel ships.
She was launched on 5 December 1885 by John Roach & Sons of Chester, Pennsylvania, sponsored by Edith Cleborne (daughter of Navy Medical Director Cuthbert J. Cleborne) and commissioned on 17 April 1889, Captain Henry Bellows Robeson in command.
Chicago was ordered as part of the "ABCD" ships, the others being the cruisers Atlanta and Boston and the dispatch vessel Dolphin. These were the first steel-hulled ships of the "New Navy". All were ordered from the same shipyard, John Roach & Sons of Chester, Pennsylvania. However, when Secretary of the Navy William C. Whitney initially refused to accept Dolphin, claiming her design was defective, the Roach yard went bankrupt and Chicago's completion was delayed about three years while Roach reorganized as the Delaware River Iron Ship Building and Engine Works. Like the other "ABCD" ships, Chicago was built with a sail rig to increase cruising range.
Chicago was built with a displacement of 4,500 long tons (4,600 t) at an overall length of 342 ft 2 in (104.29 m) and 325 ft (99 m) at the perpendiculars. Her beam was 48 ft 3 in (14.71 m) with a draft of 19 ft (5.8 m). She was had fourteen 100psi boilers that ran two compound overhead beam steam engines that producing 5,084 ihp (3,791 kW) to turn her two screws and achieve a speed of 14 kn (16 mph; 26 km/h). She was also rigged for sails in a Schooner configuration. Chicago was capable of carrying 830 short tons (750 t) of coal.