Symphony SA-160 | |
---|---|
Role | Light aircraft |
National origin | Germany/Canada |
Manufacturer |
Ostmecklenburgische Flugzeugbau Symphony Aircraft Industries |
Introduction | 2001 |
Status | Production completed |
Produced | 2001-2003 2005-2006 |
Unit cost |
US$154,900 (base price 2006)
|
Developed from | Stoddard-Hamilton Glastar |
The Symphony SA-160 is a CAR 523 certified, two-seat, single-engine, high-wing airplane that was manufactured by Symphony Aircraft Industries in Trois-Rivières, Quebec, Canada in the mid-2000s.
The SA-160 is a development of the Stoddard-Hamilton Glastar amateur-built kit aircraft and is externally similar to that design.
The SA-160 was developed from the Glastar by incorporating many significant changes to the basic design with the aim of simplifying construction and complying with certification requirements. The redesign work was completed by the engineering staff of Ostmecklenburgische Flugzeugbau (OMF Aircraft), (East Mecklenburg Aircraft Works Limited) of Neubrandenburg, Mecklenburg-Vorpommern, Germany between 1998 and 2000. The aircraft produced by OMF were sold under the designation OMF-100-160 Symphony. Later aircraft produced by Symphony Aircraft are designated Symphony SA-160.
The SA-160 has an aluminum wing design, utilizing a NASA GAW-2 Whitcomb airfoil. To simplify construction the wing has no washout and instead has two composite vortex generators of a unique design, outboard on each wing, to ensure that the inboard portion of the wing stalls first, thus retaining aileron control through the stall.
The wing is equipped with slotted Fowler flaps, which occupy 2/3 of the span. These deploy to 40 degrees and lower the stall speed by 9 knots to 51 knots (60 mph). The flaps are always set to 20 degrees for takeoff. The ailerons are operated by control sticks and feature end-fences inboard and outboard for better slow speed and stall handling.
The fuselage is a 4130 welded steel tube cage covered in a non-structural fibreglass skin. The tail group is a mix of fibreglass fairings and aluminum surfaces.
The SA-160 is powered by a Lycoming O-320-D2A powerplant of 160 hp, driving a two-bladed wood fixed pitch MT propeller.