Shelby GLHS
.jpg) |
|
| Overview | |
|---|---|
| Manufacturer |
Chrysler Corporation Shelby |
| Production | 1986-1987 |
| Assembly | Belvidere, Illinois |
| Body and chassis | |
| Class | Sport compact |
| Body style | 3-door hatchback (1987) 5-door hatchback (1986) |
| Layout | Transverse front-engine, front-wheel drive |
| Platform | L-body |
| Related |
Dodge Charger Dodge Omni Plymouth Horizon Plymouth Turismo |
| Powertrain | |
| Engine | 2.2 L Turbo I I4 |
| Transmission | 5-speed A525 manual |
The Shelby GLHS was a limited production sport compact automobile from the mid-1980s. The main differentiator of these cars from their regular Dodge versions was their use of what would become the intercooled Turbo II engine as well as Shelby Centurian wheels and Koni Adjustable shocks/struts, and changes to the alignment.
The '1986 Shelby GLH-S' was a modified Dodge Omni GLH, with changes made at the Shelby factory. They were retitled as Shelby Automobiles cars sold at select Dodge dealerships. GLH stood for "Goes Like Hell" and GLHS stood for Goes Like Hell S'more. Just 500 were made.
Dash plaques used a 3-digit serial numbering system (as only 500 were made).
The Turbo I engine was modified with pre-production pieces from what would become the Turbo II inline-four engine. These changes included an intercooler, plus other changes to produce 175 hp (130 kW) and a flat 175 ft·lbf (237 N·m) torque curve. Not included were any of the durability changes to the short block (forged crank, full floating pin, stouter connecting rods, etc.) of the 1987 Chrysler Turbo II engine. Luckily, the Shelby engines have proved to be reliable even without the durability enhancements of the production Turbo II. Performance was impressive, with just 6.5 s needed for 0–60 mph (97 km/h) and 14.8 s for the quarter mile (402 m) run. Top speed was 130 mph (209 km/h).
Shelby Automobiles received the first T-2 induction pieces (prior to Dodge/Chrysler), and installed them on the 500 GLH cars that shipped to the Whittier factory. Engine mods. included: New T-2 fuel rail, T-2 injectors, wiring harness, larger throttle body, bigger turbo, tuned intake & exhaust manifolds, intercooler/rad. & fan assemblies, induction hoses, T-2 airbox, GLHS specific logic module, CS-Shelby-CS windshield decal, & tape graphics pkg. Interestingly, there was a Dodge emblem left on in production. A black/yellow overlay sticker was placed at the bottom of the speedometer to read to 135 mph (217 km/h). A Momo leather-wrapped shifter knob, Izumi leather-wrapped steering wheel, and shift pattern sticker were also installed. A Use only Mobil 1 in your GLHS plaque was affixed to the front of the standard production valve cover.
...
Wikipedia