R1 (New York City Subway car)
| R1 | |
|---|---|
R1 car 100 in special holiday service at 23rd Street on the IND Sixth Avenue Line
|
|
| In service | 1931-1977 |
| Manufacturer | American Car and Foundry Company |
| Built at | Berwick, Pennsylvania |
| Constructed | 1930–1931 |
| Scrapped | 1969-1977 |
| Number built | 300 |
| Number preserved | 4 |
| Number scrapped | 296 |
| Formation | motorized single units (Half-width operator's cab at each end; conductor controls on exterior) |
| Fleet numbers | 100–399 |
| Capacity | 56 seats |
| Operator(s) |
Independent Subway System New York City Transit Authority |
| Specifications | |
| Car body construction | Riveted steel |
| Car length | 60 ft 6 in (18.44 m) |
| Width | 10 ft 0 in (3.05 m) |
| Height | 12 ft 1.9375 in (3.71 m) |
| Floor height | 3 ft 1.875 in (0.96 m) |
| Doors | 8 |
| Maximum speed | 55 mph (89 km/h) |
| Weight | 84,081 lb (38,139 kg) |
| Traction system | Westinghouse ABF type UP143B switch group, with XM-29 master controller using Westinghouse 570 D-5 traction motors (190 hp each). Two motors per car (both on motor truck, trailer truck not motorized). |
| Power output | 190 hp (142 kW) per traction motor |
| Acceleration | 1.75 mph/s (2.82 km/(h·s)) |
| Deceleration | ~ 3 mph/s |
| Electric system(s) | 600 V DC Third rail |
| Current collection method | Contact shoe (Top running) |
| Braking system(s) |
WABCO Schedule AMUE with UE-5 universal valve, ME-23 brake stand, and simplex clasp brake rigging. (Air Compressor: WABCO D-3-F) |
| Coupling system | WABCO H2A |
| Track gauge | 4 ft 8 1⁄2 in (1,435 mm) |
WABCO Schedule AMUE with UE-5 universal valve, ME-23 brake stand, and simplex clasp brake rigging.
The R1 was the first New York City Subway car type built for the IND. 300 cars were manufactured between 1930 and 1931 by the American Car and Foundry Company, numbered 100 through 399. Future passenger stock orders – including contracts R4, R6, R7, R7A, and R9 – were virtually identical, with minor mechanical and cosmetic variations. Therefore, these car classes are frequently referred to collectively as Arnines, or R1-9s.
The R1s were also specifically sometimes referred to as City Cars.
They introduced several improvements to subway car design that greatly sped up the flow of passengers in and out of trains.
The first R1 cars to see passenger service were twenty individual cars to serve for two 8 car trains plus spares that were placed in revenue service on the BMT Sea Beach Line from July 8 to November, 1931 for testing and then returned to the IND the same year.The BMT was to have been paid by the City of New York for the testing but since they were fairly extensively used in service (made up as two 8-car trains), the BMT and City called it even.
The cars were ordered so that the new Eighth Avenue Line subway could be operated.
In 1949 when all of the R10 cars were delivered and placed in service on the A line, approximately 224 of these R1 cars were transferred to the 36th Street Yard of the BMT Southern Division to relieve a car shortage on the BMT Lines, and used for service on the BMT 2 (now R) Broadway 4th Avenue Local service, which was extended from Queensboro Plaza to the Astoria-Ditmars Blvd. Station of this former IRT line, which also happened in 1949 which required more cars for operating this new extended BMT service until 1961 when new R27/30's cars were delivered to the New York City Transit System's BMT Lines, which in turn replaced and released these loaned R1 cars to be sent back to the IND Division.
...
Wikipedia