Ox wagon

An ox-wagon or bullock wagon is a four-wheeled vehicle pulled by oxen (draught cattle). It was a traditional form of transport, especially in Southern Africa but also in New Zealand and Australia. Ox-wagons were also used in the United States. The first recorded use of an ox-wagon was around 1670, but they continue to be used in some areas up to modern times.

Ox-wagons are typically drawn by teams of oxen, harnessed in pairs. This gave them a very wide turning circle, the legacy of which are the broad, pleasant boulevards of cities such as Bulawayo, Zimbabwe, which are 120-foot (40 m) wide, and Grahamstown, South Africa, which are "wide enough to turn an ox-wagon".

The wagon itself is made of various kinds of wood, with the rims of the wheels being covered with tyres of iron, and since the middle of the 19th century the axles have also been made of iron. The back wheels are usually substantially larger than the front ones and rigidly connected to the tray of the vehicle. The front wheels are usually greater in diameter than the clearance under the tray of the vehicle so that the steering axle could not turn far under the tray. This makes little difference to the turning circle of the wagon because of the oxen drawing it (see above) and it makes the front of the wagon much more stable because the track is never much less than the width of the tray. It also allowed a much more robust connection between the hauling traces of the oxen and the rear axle of the wagon (usually iron chain or rods) that is necessary for heavy haulage.

Most of the load-carrying area was covered in canvas supported by wooden arches; the driver sat in the open on a wooden chest (Afrikaans: wakis).

Bullock wagons were important in the colonial history of Australia. Olaf Ruhen, in his book Bullock Teams remarks on how bullock teams "shaped and built the colony. They carved the roads and built the rail; their tractive power made populating the interior possible; their contributions to the harvesting of timber opened the bush; they offered a start in life to the enterprising youngster". Bullocks were preferred by many explorers and teamsters because they were cheaper, quieter, tougher and more easily maintained than horses therefore making them more popular for draught work. Frequently comprising long trains of bullocks, yoked in pairs, they were used for hauling drays, wagon or jinker loads of goods and lumber prior to the construction of railways and the formation of roads. In early days the flexible two-wheeled dray, with a centre pole and narrow 3-inch (8 cm) iron tyres was commonly used. The four-wheeled dray or box wagon came into use after about 1860 for loads of 6 to 8 tons and was drawn by 16 to 18 bullocks. A bullock team was led by a pair of well trained leaders who responded to verbal commands as they did not have reins or a bridle. The bullock team driver was called a bullocky, bullock puncher or teamster.

...
Wikipedia