Maximum transmission unit

In computer networking, the maximum transmission unit (MTU) is the size of the largest network layer that can be communicated in a single network transaction. Fixed MTU parameters usually appear in association with a communications interface or standard. Some systems may decide MTU at connect time. The MTU relates to, but is not identical with the maximum frame size that can be transported on the data link layer, e.g. Ethernet frame.

A larger MTU brings greater efficiency because each network packet carries more user data while protocol overheads, such as headers or underlying per-packet delays, remain fixed; the resulting higher efficiency means an improvement in bulk protocol throughput. A larger MTU also means processing of fewer packets for the same amount of data. In some systems, per-packet-processing can be a critical performance limitation.

However, this gain is not without a downside. Large packets occupy a slow link for more time than a smaller packet, causing greater delays to subsequent packets, and increasing lag and minimum latency. For example, a 1500-byte packet, the largest allowed by Ethernet at the network layer (and hence over most of the Internet), ties up a 14.4k modem for about one second. Large packets are also problematic in the presence of communications errors. If no forward error correction is used, corruption of a single bit in a packet requires that the entire packet be retransmitted, which can be very costly. At a given bit error rate, larger packets are more likely to be corrupt. Their greater payload makes retransmissions of larger packets take longer. Despite the negative effects on retransmission duration, large packets can still have a net positive effect on end-to-end TCP performance.

MTUs apply to and network layers. The MTU is specified in terms of bytes or octets of the largest that the layer can pass onwards. MTU parameters usually appear in association with a communications interface (NIC, serial port, etc.). Standards (Ethernet, for example) can fix the size of an MTU; or systems (such as point-to-point serial links) may decide MTU at connect time.

...
Wikipedia