Corin Dam | |
---|---|
Corin Reservoir, 2009
|
|
Location of the Corin Dam in the ACT
|
|
Country | Australia |
Location | Australian Capital Territory |
Coordinates | 35°33′55″S 148°49′52″E / 35.56541°S 148.83108°ECoordinates: 35°33′55″S 148°49′52″E / 35.56541°S 148.83108°E |
Purpose | Potable water supply |
Status | Operational |
Opening date | 1968 |
Owner(s) | ACTEW Corporation |
Dam and spillways | |
Type of dam | Embankment dam |
Impounds | Cotter River |
Height | 74 m (243 ft) |
Length | 282 m (925 ft) |
Dam volume | 1,394×10 3 m3 (49×10 6 cu ft) |
Spillways | 1 |
Spillway type | Uncontrolled side channel |
Spillway capacity | 1,190 m3/s (42,000 cu ft/s) |
Reservoir | |
Creates | Corin Reservoir |
Total capacity | 75,500 ML (1.66×1010 imp gal; 1.99×1010 US gal) |
Active capacity | 70,800 ML (1.56×1010 imp gal; 1.87×1010 US gal) |
Catchment area | 197 km2 (76 sq mi) |
Surface area | 315 ha (780 acres) |
Normal elevation | 956 m (3,136 ft) |
Website Corin Dam at ACTEW Water |
The Corin Dam is an earth and rockfill embankment dam with an uncontrolled side channel spillway across the Cotter River, located within Namadgi National Park in the Australian Capital Territory, Australia. The impounded reservoir is called the Corin Reservoir which is a supply source of potable water for the city of Canberra and its environs. It is named after William Corin (1867-1929), a pioneer in hydroelectric development in Australia.
Constructed by Thiess Bros Pty Limited working from designs prepared by the Commonwealth Department of Works, the Corin Dam was completed and opened in 1968. The earthen dam wall built on a rock foundation is 74 metres (243 ft) high and 282 metres (925 ft) long with a volume of 1,394 thousand cubic metres (49.2×10 6 cu ft). The wall impounds 75,500 megalitres (1.66×1010 imp gal; 1.99×1010 US gal) of water held within the Corin Reservoir, forming a surface area of approximately 3.15 square kilometres (1.22 sq mi) drawn from a catchment area of 197 square kilometres (76 sq mi). The uncontrolled side channel spillway is capable of discharging 1,190 cubic metres per second (42,000 cu ft/s) from the reservoir, with a high water level approximately 955.54 metres (3,135 ft) above sea level.
Water from the Corin, together with the Bendora (downstream), and the Cotter dams (further downstream) are pumped to the suburbs of Canberra via the Bendora Gravity Main.