*** Welcome to piglix ***

Vanadium(III) fluoride

Vanadium(III) fluoride
Structure that almost similar to vanadium(III) fluoride
Names
Other names
Vanadium fluoride, Vanadium trifluoride
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.030.141
PubChem CID
UNII
Properties
F3V
Molar mass 107.94 g·mol−1
Appearance Yellow-green powder (anhydrous)
Green powder (trihydrate)
Density 3.363 g/cm3
Melting point 1,395 °C (2,543 °F; 1,668 K)
at 760 mmHg (anhydrous)
~ 100 °C (212 °F; 373 K)
at 760 mmHg (trihydrate) decomposes
Boiling point Sublimes
Insoluble
Solubility Insoluble in EtOH
2.757·10−3 cm3/mol
Structure
Rhombohedral, hR24
R3c, No. 167
3 2/m
a = 5.17 Å, c = 13.402 Å
α = 90°, β = 90°, γ = 120°
Hazards
GHS pictograms The corrosion pictogram in the Globally Harmonized System of Classification and Labelling of Chemicals (GHS)The skull-and-crossbones pictogram in the Globally Harmonized System of Classification and Labelling of Chemicals (GHS)
GHS signal word Danger
H301, H311, H331, H314
P261, P280, P301+310, P305+351+338, P310
NFPA 704
Flammability code 0: Will not burn. E.g., water Health code 3: Short exposure could cause serious temporary or residual injury. E.g., chlorine gas Reactivity code 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g., phosphorus Special hazards (white): no codeNFPA 704 four-colored diamond
Related compounds
Other anions
Vanadium(III) chloride
Vanadium(III) oxide
Vanadium(III) nitride
Other cations
Vanadium(IV) fluoride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N  (what is YesYN ?)
Infobox references

Vanadium(III) fluoride is the chemical compound with the formula VF3. This yellow-green, refractory solid is obtained in a two-step procedure from V2O3. Similar to other transition-metal fluorides (such as MnF2), it exhibits magnetic ordering at low temperatures (e.g. V2F6.4H2O orders below 12 K).

The first step entails conversion to the hexafluorovanadate(III) salt using ammonium bifluoride:

In the second step, the hexafluorovanadate is thermally decomposed.

The thermal decomposition of ammonium salts is a relatively common method for the preparation of inorganic solids.

VF3 can also be prepared by treatment of V2O3 with HF. VF3 is a crystalline solid with 6 coordinate vanadium atoms with bridging fluorine atoms. The magnetic moment indicates the presence of two unpaired electrons.


...
Wikipedia

...