Strobe light

A strobe light or stroboscopic lamp, commonly called a strobe, is a device used to produce regular flashes of light. It is one of a number of devices that can be used as a stroboscope. The word originated from the Greek strobos, meaning "act of whirling."

A typical commercial strobe light has a flash energy in the region of 10 to 150 joules, and discharge times as short as a few milliseconds, often resulting in a flash power of several kilowatts. Larger strobe lights can be used in “continuous” mode, producing extremely intense illumination.

The light source is commonly a xenon flash lamp, or flashtube, which has a complex spectrum and a color temperature of approximately 5,600 kelvins. To obtain colored light, colored gels may be used.

Strobe lights usually use flashtubes with energy supplied from a capacitor, an energy storage device much like a battery, but capable of charging and releasing energy much faster. Recently, some strobe lights have been found to use rectified mains electricity and no capacitors at all. In a capacitor-based strobe light, the capacitor is charged up to around 300 V. Once the capacitor has been charged, a small amount of power is diverted into a trigger transformer, a small transformer with a high turns ratio. This generates the weak but high voltage spike required to ionize the xenon gas in a flash tube. An arc is created inside the tube, which acts as a bridge for the much bigger pulse to flow down later. Arcs present almost a direct short circuit, allowing the capacitors to quickly release their energy into the arc. This rapidly heats the xenon gas, creating an extremely bright plasma discharge, which is seen as a flash.

A strobe without a capacitor storage device simply discharges mains voltages across the tube once it's fired. This type of strobe requires no charging time and allows for much quicker flash rates, but drastically reduces the lifetime of the flash tube if powered for significant periods of time. Such strobes require a form of current limiting, because as mentioned above, an arc acts as a kind of short circuit. If this current limiting were to be eliminated, the flash tube would attempt to draw high currents from the electricity source, potentially tripping electrical breakers or causing voltage drops in the power supply line.

...
Wikipedia