South African Class 9E, Series 2

South African Class 9E, Series 2

No. E9030 at Saldanha, Western Cape, 26 July 2009

Type and origin Power type Electric Designer General Electric Company Builder Union Carriage & Wagon Serial number 5595-5600 Model GEC 9E Build date 1982-1983 Total produced 6

Specifications AAR wheel arr. C-C UIC class Co'Co' Gauge 3 ft 6 in (1,067 mm) Cape gauge Wheel diameter 1,220 mm (48.0 in) Wheelbase 16,290 mm (53 ft 5.3 in)  • Bogie 3,940 mm (12 ft 11.1 in) Pivot centres 12,700 mm (41 ft 8.0 in) Length: ​  • Over couplers 21,132 mm (69 ft 4.0 in)  • Over beams 20,120 mm (66 ft 0.1 in) Width 2,900 mm (9 ft 6.2 in) Height: ​  • Pantograph 3,900 mm (12 ft 9.5 in)  • Body height 3,900 mm (12 ft 9.5 in) Axle load 28,000 kg (62,000 lb) max Adhesive weight 166,300 kg (366,600 lb) Loco weight 166,300 kg (366,600 lb) Power supply Catenary Current collection Pantograph Traction motors Six G415AZ  • Rating 1 hour 690 kW (930 hp)  • Continuous 640 kW (860 hp) Gear ratio 18:83 Loco brake Air & Rheostatic Train brakes Vacuum & Air Wabco "Vaporid" air dryer Couplers AAR knuckle

Performance figures Maximum speed 90 km/h (56 mph) Power output: ​  • 1 hour 4,140 kW (5,550 hp)  • Continuous 3,840 kW (5,150 hp) Tractive effort: ​  • Starting 570 kN (130,000 lbf)  • 1 hour 483 kN (109,000 lbf)  • Continuous 388 kN (87,000 lbf)

Career Operators South African Railways Spoornet Transnet Freight Rail Class Class 9E Power class 50 kV 50 Hz AC Number in class 6 Numbers E9026-E9031 Locale Sishen-Saldanha Orex line Delivered 1982-1983 First run 1982

The South African Railways Class 9E, Series 2 of 1982 is an electric locomotive.

In 1982 and 1983, the South African Railways expanded its existing Class 9E fleet, by placing six new Class 9E, Series 2 General Electric Company 50 kV AC electric locomotives with a Co-Co wheel arrangement in service on the Sishen-Saldanha iron ore line.

The 50 kV AC Class 9E, Series 2 electric locomotive was designed for the South African Railways (SAR) by the General Electric Company (GEC) and was built by Union Carriage and Wagon (UCW) in Nigel, Transvaal.

GEC works numbers were allocated to Class 9E locomotives. UCW delivered six locomotives in 1982 and 1983, numbered in the range from E9026 to E9031.

The locomotive has a single full width air conditioned cab. At the rear end, the body work is lower to provide clearance for the 50 kV AC electrical equipment, which is mounted on the roof. This consists of a single pantograph, a potential divider, a vacuum circuit breaker, a surge diverter and the main transformer’s high voltage terminal. The electrical control system is solid state, using thyristors.

Since huge voltage drops are often encountered between electric sub-stations, the locomotive was designed to be able to operate on a supply varying between 55 and 25 kV AC. The battery boxes and the main air reservoirs are mounted between the bogies underneath the frame, where a compartment also houses a small motor scooter, for use by the crew for lineside inspections of the train, which can be 4 kilometres (2.5 miles) long.

Series 2 locomotives were delivered with five braking systems, air brakes for the locomotive, train air braking, train vacuum braking, a handbrake and dynamic rheostatic braking, which can dissipate 4,200 kilowatts (5,600 horsepower). The Series 1 locomotives were delivered without a vacuum brake system.

By 2007, the entire fleet of both series of Class 9E electric locomotives were upgraded with Alstom's Agate train control and communication technology. The pantographs on most of these locomotives were also replaced by the single arm type.

The Series 1 and Series 2 Class 9Es can be visually distinguished from each other by their bogies, which were redesigned for the Series 2 locomotives.

Class 9E locomotives are used on the 861 kilometres (535 miles) Sishen-Saldanha iron ore line, to haul export ore from the open cast iron mines at Sishen in the Northern Cape, to the harbour at Saldanha in the Western Cape. Most of the route is across the hot and dry Northern Cape, but the last 75 kilometres (47 miles) to Saldanha runs parallel to the Atlantic coastline and is subjected to the fog and salt sea air of the West Coast.