*** Welcome to piglix ***

Roosevelt Dam

Theodore Roosevelt Dam
Roosevelt Dam seen from downstream
Roosevelt Dam seen from downstream
Country United States
Location Gila County / Maricopa County, Arizona
Coordinates 33°40′18″N 111°09′40″W / 33.67167°N 111.16111°W / 33.67167; -111.16111Coordinates: 33°40′18″N 111°09′40″W / 33.67167°N 111.16111°W / 33.67167; -111.16111
Status Operational
Construction began 1903 (1903)
Opening date 1911
Owner(s) Bureau of Reclamation
Dam and spillways
Type of dam Arch-gravity dam
Impounds Salt River, Tonto Creek
Height 357 ft (109 m)
Length 1,210 ft (369 m)
Width (crest) 21.6 ft (6.6 m)
Width (base) 196 ft (60 m)
Dam volume 606,000 cu yd (463,000 m3)
Spillway capacity 150,000 cu ft/s (4,200 m3/s)
Reservoir
Creates Theodore Roosevelt Lake
Total capacity 1,653,043 acre·ft (2.039×109 m3) (conservation)
2,910,200 acre·ft (3.590×109 m3) (flood control)
Catchment area 5,830 sq mi (15,100 km2)
Surface area 21,493 acres (86.98 km2) (conservation)
Power station
Operator(s) Salt River Project
Hydraulic head 249 ft (76 m)
Installed capacity 36 MW (48,000 hp)
Designated 1963
Delisted 1999

Theodore Roosevelt Dam is a dam on the Salt River located northeast of Phoenix, Arizona. The dam is 357 feet (109 m) high and forms Theodore Roosevelt Lake as it impounds the Salt River. Originally built between 1905 and 1911; the dam was renovated and expanded in 1989-1996. The dam is named after then-President Theodore Roosevelt. Serving mainly for irrigation water supply and flood control, the dam also has a hydroelectric generating capacity of 36 megawatts.

One of the original five federal projects authorized on March 14, 1903, under the Newlands Reclamation Act of 1902, Roosevelt Dam was the first major project to be completed under the new federal reclamation program. This, one of the world's highest masonry dam, was started in 1906 and completed in 1911. The beginning of federal production of electric power occurred at Roosevelt Dam when Congress, in 1906, authorized the Reclamation Service to develop and sell hydroelectric power at the Salt River Project.

The Reclamation Act of 1902 created the United States Reclamation Service whose purpose was to design and construct irrigation projects to aid the settlement of the arid west. Previous efforts by individuals and private irrigation companies were inadequate and often unsuccessful. With the creation of the Reclamation Service, the lead role of the federal government in developing large-scale irrigation projects was firmly established.

Construction on Roosevelt Dam began in 1903 just below the confluence of Tonto Creek and the Salt River. The primary purpose of the project was to provide water storage for the Salt River Project and flood control through the Salt River Valley. The dam was finished in 1911 after several devastating floods had interrupted the construction progress in 1905. Completed at a cost of $10 million, it was the largest masonry dam in the world for its time with a height of 280 feet (84 m) and a length of 723 feet (216 m), while Roosevelt Lake was for a time the world's largest artificial reservoir. The dam was originally known as "Salt River Dam #1", it was not until 1959 that the dam and reservoir were officially named after Theodore Roosevelt.

Roosevelt Dam, as originally conceived and built, was a symbol of success and a showpiece for the new agency. The dam contributed more than any other dam in Arizona to the settlement of Central Arizona and to the development of large-scale irrigation there. A secondary purpose of the dam was to generate a moderate amount of hydroelectric power. The lake created behind Roosevelt Dam, known as Lake Roosevelt, could hold more than 1,600,000 acre feet (2.0 km3) of water.


...
Wikipedia

...