Country of origin | Russia |
---|---|
Date | 1993-2006 |
First flight | 2006-12-27 |
Designer | KBKhA (Chief designers: Valery Kozelkov, Viktor Gorokhov) |
Manufacturer | KBKhA in-house |
Application | Upper Stage |
Associated L/V | Soyuz-2 |
Predecessor | RD-0110 |
Status | In Production |
Liquid-fuel engine | |
Propellant | LOX / RG-1 |
Cycle | Staged Combustion |
Configuration | |
Chamber | 4 |
Performance | |
Thrust (vac.) | 294.3 kN (66,200 lbf) |
Thrust-to-weight ratio | 52.5 |
Chamber pressure | 15.7 MPa (2,280 psi) |
Isp (vac.) | 359 s (3.52 km/s) |
Burn time | 300s |
Dimensions | |
Length | 1,575 mm (62.0 in) |
Diameter | 2,400 mm (94 in) |
Dry weight | 572 kg (1,261 lb) |
Used in | |
Soyuz-2-1b and Soyuz-2-1v Block-I | |
References | |
References |
The RD-0124 (GRAU Index 14D23) is a rocket engine burning liquid oxygen and kerosene in a staged combustion cycle. RD-0124 engines are used on the Soyuz-2.1b and Soyuz-2-1v. A slight variation of the engine, the RD-0124A, is used on the Angara rocket family URM-2 upper stage. RD-0124 is developed by Khimavtomatiki Design Bureau.
RD-0124 engines use a multi-stage turbopump powered by pre-combustion of the engine propellants in the preburner. The kerosene fuel is used for regenerative cooling of the engine. Vehicle attitude control during ascent is provided by gimbaling the engine in two planes. The propellant tanks are helium-pressurized. Four combustion chambers are fed by a single turbopump system. The engine operates at a high chamber pressure and, for the type of propellants used, achieves a very high specific impulse.
The inaugural flight of a launch vehicle using an RD-0124 engine took place on December 27, 2006.Orbital Sciences considered using the RD-0124 in the High Energy Second Stage (HESS) for their Antares rocket. It would have replaced the Castor 30B second stage.
This upper stage engine has been adapted to two different launch vehicles, the Soyuz-2-1b/v and the Angara family. As such, there are different versions: