Pulse (signal processing)

In signal processing, the term pulse has the following meanings:

Pulse shapes can arise out of a process called pulse-shaping. Optimum pulse shape depends on the application.

These can be found in pulse waves, square waves, boxcar functions, and rectangular functions. In digital signals the up and down transitions between high and low levels are called the rising edge and the falling edge. In digital systems the detection of these sides or action taken in response is termed edge-triggered, rising or falling depending on which side of rectangular pulse. A digital timing diagram is an example of a well-ordered collection of rectangular pulses.

A Nyquist pulse is one which meets the Nyquist ISI criterion and is important in data transmission. An example of a pulse which meets this condition is the sinc function. The sinc pulse is of some significance in signal-processing theory but cannot be produced by a real generator for reasons of causality.

In 2013, Nyquist pulses were produced in an effort to reduce the size of pulses in optical fibers, which enables them to be packed 10x more closely together, yielding a corresponding 10x increase in bandwidth. The pulses were more than 99 percent perfect and were produced using a simple laser and modulator.

A Gaussian pulse is shaped as a Gaussian function and is produced by a Gaussian filter. It has the properties of maximum steepness of transition with no overshoot and minimum group delay.

...
Wikipedia