NJTR PL42AC #4011
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Sources: except where noted |
Type and origin | |
---|---|
Power type | Diesel-electric |
Builder | Alstom, EMD |
Model | PL42AC |
Build date | 2003 – 2006 |
Specifications | |
---|---|
UIC class | Bo'Bo' |
Gauge | 4 ft 8 1⁄2 in (1,435 mm) |
Wheel diameter | 42 in (1,100 mm) |
Length | 69 ft 10 in (21.29 m) |
Width | 10 ft 8 in (3.25 m) |
Height | 15 ft 5 in (4.70 m) |
Loco weight | 144 short tons (131,000 kg) (287000lb) |
Fuel capacity | 2,250 US gal (8,500 l) |
Prime mover | EMD EMD 16-710G3B-T1, V16 |
Engine type | 2 stroke diesel |
Alternator | TA-17 |
Head end power | 800 kW (1,100 hp) |
Performance figures | |
---|---|
Maximum speed | 160 km/h (99 mph) |
Power output |
At Alternator:4,200 hp (3.1 MW) At Rail: 3,620 hp (2.70 MW) MAX with HEP on |
Tractive effort |
starting: 69,975 lbf (311.26 kN) continuous: 27,000 lbf (120 kN) |
Career | |
---|---|
Operators | NJ Transit |
Numbers | 4000 – 4032 |
The Alstom PL42AC is a class of four axle Bo-Bo Diesel-electric locomotive designed by Alstom in association with GM-EMD between 2003 and 2006 for New Jersey Transit, USA.
The PL42AC is a diesel-electric 4-axle locomotive built at by Alstom with GM-EMD 710 engines for New Jersey Transit. The first 33 locomotives were manufactured at the Meinfesa plant in Valencia, Spain in 2003. Later units were assembled at the Alstom Transport plant in Hornell, New York in 2004 and were produced through early 2006. The power rating of the PL42AC locomotives is 4200 hp (3.1 MW) total for tractive effort and head-end power.
This locomotive uses IGBT technology with precise traction computers for tractive effort. The PL42 has 800 kilowatts head-end power and WABCO's EPIC II braking system, along with an E-7 wheel slide device, made by Wabtec, preventing flats spots on the wheels through software and hardware.
It has an Intelligent Display Unit (IDU) based on Bombardier Transportation technology from which an engineer or technician can view data or download events and faults from the previous weeks or months. The technician can do a host of tests from the IDU to determine if a specific system is operating correctly.
The PL42AC uses computer hardware and software to control functions and to protect the engine. For example, if the on-board computer detects too little oil in the system, it will shut down the engine to avoid damage.