*** Welcome to piglix ***

Model engine


In radio-controlled modeling, a model engine is an internal combustion engine used to power a radio-controlled aircraft, radio-controlled car, radio-controlled boat, free flight and control line aircraft, and tether car models also use these engines. Because of the square-cube law, the behaviour of many machines does not always scale up or down at the same rate as the machine's size (and often not even in a linear way), usually at best causing a dramatic loss of power or efficiency, and at worst causing them not to work at all. Methanol and nitromethane are proven solutions to enhance the power of an automobile engine (Top Fuel) and they can even get these small engines running.

The fully functional, albeit small, engines vary from the most common single-cylinder two-stroke to the exotic single and multiple-cylinder four-stroke, the latter taking shape in boxer, v-twin, inline and radial form, a few Wankel engine designs are also used. Most model engines run on a blend of methanol, nitromethane, and lubricant (either castor or synthetic oil). Two-stroke model engines, most often designed since 1970 with Schnuerle porting for best performance, range in typical size from .12 cubic inches (2 cubic centimeters) to 1.2 ci (19.6 cc) and generate between .5 horsepower (370 watts) to 5 hp (3.7 kW), can get as small as .010 ci (.16 cc) and as large as 3-4 ci (49–66 cc). Four-stroke model engines have been made in sizes as small as 0.20 in3 (3.3 cc) for the smallest single-cylinder models, all the way up to 3.05 in3 (50 cc) for the largest size for single-cylinder units, with twin- and multi-cylinder engines on the market being as small as 10 cc for opposed-cylinder twins, while going somewhat larger in size than 50 cc, and even upwards to well above 200 cc for some model radial engines. While the methanol and nitromethane blended "glow fuel" engines are the most common, many larger (especially above 15 cc/0.90 ci displacement) model engines, both two-stroke and a growing number of four-stroke examples are spark ignition, and are primarily fueled with gasoline — with some examples of both two and four-stroke glow plug-designed methanol aeromodeling engines capable, with aftermarket upgrades, to having battery-powered, electronically controlled spark ignition systems replacing the glow plugs normally used. Model engines refitted in such a manner often run more efficiently on methanol-based glow plug engine fuels, often with the ability to exclude the use of nitromethane altogether in their fuel formulas. This article concerns itself with the methanol engines; gasoline-powered model engines are similar to those built for use in string trimmers, chainsaws, and other yard equipment, unless they happen to be purpose-built for aeromodeling use, being especially true for four-stroke gasoline-fueled model engines. Such engines usually use a fuel that contains a small percentage of motor oil as a two-stroke engine uses for lubrication purposes, as most model four-stroke engines — be they glow plug or spark ignition — have no built-in reservoir for motor oil in their crankcase or engine block design.


...
Wikipedia

...