Miles Falcon Six

M.3 Falcon
Miles M.3A Falcon Major G-AEEG at Old Warden
Role	Cabin monoplane
Manufacturer	Miles Aircraft Limited
Designer	Frederick George Miles
First flight	1934
Number built	36
Developed into	Miles M.4 Merlin

The Miles M.3 Falcon is a 1930s British three/four-seat cabin monoplane aircraft designed by Miles Aircraft Limited.

The M.3 Falcon was a clean, single engined low-wing monoplane with trousered main undercarriage and fixed tail-wheel, designed in 1934. It was structurally similar to the earlier Miles M.2F Hawk Major family, but had side-by-side seating for two behind the pilot in a glazed cockpit. It was powered by a 130 hp (97 kW) de Havilland Gipsy Major piston engine. The prototype, G-ACTM, built by Philips and Powis first flew at Woodley Aerodrome on 12 October 1934.

The first production aircraft (designated M.3A Falcon Major) was flown in January 1935. It had a wider fuselage than the prototype to improve passenger comfort and revised glazing with a forward sloping windscreen. The M.3A was somewhat underpowered, so the (M.3B Falcon Six) and later versions were fitted with a 200 hp (150 kW) de Havilland Gipsy Six engine.

The M.3C Falcon Six was a four seater with dual controls. The M.3D was strengthened to allow an 11% increase in all up weight compared with the M.3B. The final versions were the M.3E and M.3F.

An enlarged five-seat version was developed as the M.4 Merlin.

The prototype was fitted with extra fuel tanks and entered into the MacRobertson Race from England to Australia in October 1934. It took 27 days to reach Darwin, but returned in a record time of 7 days 19 hours 15 minutes, including one stage of 1,800 miles (2,900 km) non-stop from Jodhpur to Basra.

Twenty-nine M.3As and M.3Bs were delivered during 1935-6 to private owners, clubs and commercial operators in Britain and abroad.

...
Wikipedia