Locomotion No 1

Locomotion No. 1

Locomotion at Darlington Railway Centre and Museum

Type and origin Power type Steam Builder Robert Stephenson and Company Build date 1825

Specifications Configuration 0-4-0 Driver dia. 48 in (1.219 m) Loco weight 6.5 long tons (7.3 short tons; 6.6 t) Fuel type Coke Fuel capacity 2,200 lb or 1,000 kg or 1.00 t Water cap 400 imp gal or 480 US gal or 1,800 L Boiler pressure 50 psi (0.34 MPa) Heating surface 60 sq ft (5.57 m2) Cylinders 2 Cylinder size 9.5 in × 24 in (241 mm × 610 mm)

Performance figures Maximum speed 15 mph (24 km/h) Tractive effort 1,900 lbf (8.5 kN)

Career Operators First run 27 September 1825 Retired 1857 Disposition static display at the Darlington Railway Centre and Museum

Locomotion No. 1 (originally named Active) is the first steam locomotive to carry passengers on a public rail line, the . Built by George and Robert Stephenson's company Robert Stephenson and Company in 1825.

Locomotion used all the improvements that George Stephenson had pioneered in the Killingworth locomotives. It used high-pressure steam from a centre-flue boiler, with a steam-blast in the chimney, to drive two vertical cylinders, enclosed within the boiler. A pair of yokes above them transmitted the power downwards, through pairs of connecting rods. It made use of a loose eccentric valve gear, and was the first locomotive to use coupling rods to link its driving wheels together, rather than through a chain or gears. Because of the single flue, it had a poor heating surface compared to later steam locomotives. It had a top speed of 15 mph (24 km/h).

This locomotive is historically important as the first to run on a public railway, rather than for the innovations in its design. It hauled the first train on the in north-east England on 27 September 1825.

On 1 July 1828, the boiler exploded at Aycliffe Lane station, killing the driver John Cree. With advances in design such as those incorporated into Robert Stephenson's Rocket, Locomotion became obsolete very quickly. It was rebuilt and remained in service until 1841 when it was turned into a stationary engine.

In 1857 it was preserved. Locomotion No. 1 was on display in Alfred Kitching's workshop near Hopetown Carriage Works from 1857 to the 1880s. From 1892 to 1975 it was on display along with Derwent on one of the platforms at Darlington's main station, Bank Top. The locomotive is currently on display at the Darlington Railway Centre and Museum, now known as Head of Steam, in the same building as Darlington's North Road station. Locomotion is on long-term loan from the National Railway Museum and is part of the National Collection.