*** Welcome to piglix ***

Llynvi and Ogmore Railway

Llynvi and Ogmore Railway
Locale Wales
Dates of operation 1861–1873
Successor Great Western Railway
Track gauge 4 ft 8 12 in (1,435 mm) and 7 ft (2,134 mm) Brunel gauge
Length 27 miles (43 km)
Headquarters Tondu
0-6-0ST
Type and origin
Power type Steam
Builder Slaughter, Grunning & Co.
Specifications
Configuration:
 • Whyte 0-6-0ST
Gauge 7 ft (2,134 mm)
Driver dia. 4 ft 6 in (1,372 mm)
Wheelbase 15 ft 5 in (4,699 mm)
Cylinder size dia × stroke, 16.5 in × 24 in (419 mm × 610 mm)
Type and origin
Power type Steam
Builder Slaughter, Grunning & Co.
Specifications
Configuration:
 • Whyte 0-6-0ST
Gauge 7 ft (2,134 mm)
Driver dia. 4 ft 6 in (1,372 mm)
Wheelbase 15 ft 5 in (4,699 mm)
Cylinder size dia × stroke, 16.5 in × 24 in (419 mm × 610 mm)
4-4-0ST
Type and origin
Power type Steam
Builder Slaughter, Grunning & Co.
Specifications
Configuration:
 • Whyte 4-4-0ST
Gauge 7 ft (2,134 mm)
Leading dia. 3 ft 6 in (1,067 mm)
Driver dia. 5 ft 6 in (1,676 mm)
Wheelbase 18 ft 0 in (5,486 mm)
Cylinder size dia × stroke 16.5 in × 24 in (419 mm × 610 mm)
Type and origin
Power type Steam
Builder Slaughter, Grunning & Co.
Specifications
Configuration:
 • Whyte 4-4-0ST
Gauge 7 ft (2,134 mm)
Leading dia. 3 ft 6 in (1,067 mm)
Driver dia. 5 ft 6 in (1,676 mm)
Wheelbase 18 ft 0 in (5,486 mm)
Cylinder size dia × stroke 16.5 in × 24 in (419 mm × 610 mm)

The Llynvi and Ogmore Railway (originally the Duffryn, Llynvi and Porthcawl Railway) was formed by the merger on 1 July 1866 of the broad-gauge Llynvi Valley Railway and the standard-gauge Ogmore Valley Railway. It served Porthcawl, Bridgend, and Tondu in Glamorgan, Wales, along with various branches.

The company name was spelt Llynvi using the Anglicised phonetic spelling popular at the time, rather than the correct Welsh Llynfi.

The railway owned two 0-6-0STs for goods traffic. Built by Slaughter, Grunning and Company, they were similar to the South Devon Railway Dido class built at around the same time.

In 1868 they were exchanged for standard gauge locomotives from the West Cornwall Railway, which had recently been rebuilt to allow broad gauge trains to run through from the Great Western Railway to Penzance.

In 1876 Ada and Una became GWR 2146 and 2147 respectively. They were withdrawn in 1884 and 1886.

The railway owned a single 4-4-0ST passenger tank locomotive. Built by Slaughter, Grunning and Company, it was similar to the South Devon Railway Eagle class.

Rosa was also exchanged for West Cornwall Railway rolling stock in 1868. It was then rebuilt as an 0-6-0ST, making it similar to Ada and Una.

It became GWR 2145 and was withdrawn in 1885.

Twelve Lynvi and Ogmore Railway locomotives were acquired by the Great Western Railway in 1873 and renumbered 915 to 926.


...
Wikipedia

...