*** Welcome to piglix ***

Kel-Tec P-11

Kel-Tec P-11
Kel-Tec-P-11.jpg
Kel-Tec P-11
Place of origin U.S.
Production history
Designer George Kellgren
Manufacturer Kel-Tec CNC Industries Inc.
Produced Since 1995
Variants P-40, P-357
Specifications
Weight 17.1 oz (480 g)
Length 5.6 in (14 cm)
Barrel length 3.1 in (7.9 cm)
Width 1 in (2.5 cm)
Height 4.3 in (11 cm)

Cartridge 9×19mm
Action Short Recoil, DAO
Feed system 12-round magazine

The Kel-Tec P-11 is a compact, semi-automatic, short-recoil operated pistol chambered in 9 mm Luger. It has been manufactured by Kel-Tec CNC Industries of Cocoa, FL since 1995.

The P-11 was designed by Swedish-born George Kellgren, the designer of many earlier Husqvarna (Sweden), Intratec, and Grendel brand firearms. The P-11 uses an aluminum receiver inside a polymer grip housing held on with polymer pins. The slide, barrel, and magazine are steel. The standard magazine holds 10 rounds, or 12 rounds in states not limited to 10-round magazines. Both fit flush to the bottom of the pistol. At 17.1 oz (480 g) unloaded, the handgun itself is comparatively light. The P-11 lacks an external manual safety, relying instead on a long and heavy double action only (DAO) trigger pull, which requires 9 pounds of pressure, to prevent accidental discharge. A firing pin spring and low-mass hammer prevent discharge if the gun is dropped. The P-11 will also accept some Smith & Wesson 59 series magazines. An available adapter wraps around the base of 15-round Smith & Wesson model 59-style magazines. Smith & Wesson series 69 compact 12-round magazines will also work, with a matching short adapter sleeve, as well. Accessories such as trigger shoes, finger-rests, belt clips, steel guide rods to replace the factory installed polymer guide rod, gray- and OD green-colored polymer grip housings, night sights, and other accessories are also available from the manufacturer.

For a short period, the P-11 was offered in .40 S&W and .357 Sig with reduced magazine capacity. These weapons were designated P-40 and P-357. These models mated a P-11's frame to a larger slide width and barrel. Kel-Tec has suspended production of these pistols and conversion kits. In 2006, Kel-Tec introduced a single-stack pistol based on the P-11 with engineering improvements borrowed from the P-3AT. The resulting PF-9 pistol weighs about the same loaded as the P-11 empty and is somewhat slimmer.


...
Wikipedia

...