*** Welcome to piglix ***

Infinity Bridge

Infinity Bridge
Infinity Bridge from the Tees Barrage-1200.jpg
Infinity Bridge from the Tees Barrage
Coordinates 54°33′53.26″N 1°17′57.09″W / 54.5647944°N 1.2991917°W / 54.5647944; -1.2991917
Carries Pedestrians and cyclists
Crosses River Tees, Teesdale Way
Locale , England, United Kingdom
Official name Infinity Bridge
Owner Stockton-on-Tees Borough Council
Preceded by Princess of Wales Bridge
Followed by Tees Barrage
Characteristics
Design Asymmetric double tied-arch and suspended deck
Material Weathering steel, stainless steel and reinforced concrete
Total length 240 metres (787 ft)
Width 5 metres (16 ft)
Height 40 metres (131 ft)
Longest span 120 metres (394 ft)
No. of spans 2 river spans and 8 minor spans on approaches
Piers in water 1
Clearance below 8 metres (26 ft)
Design life 120 years
History
Contracted lead designer Expedition Engineering
Successful competition design Expedition Engineering and Spence Associates
Constructed by Balfour Beatty
Fabrication by Cleveland Bridge and Engineering Company
Construction begin June 2007
Construction end December 2008
Construction cost £15m
Inaugurated 14 May 2009
Opened 16 May 2009
Statistics
Daily traffic 4,000 people/day anticipated

The Infinity Bridge is a public pedestrian and cycle footbridge across the River Tees in the in the north-east of England. The bridge is situated one kilometre downriver of Stockton town centre, between the Princess of Wales Bridge and the Tees Barrage and it links the Teesdale Business Park and the University of Durham's Queen's Campus in Thornaby-on-Tees on the south bank of the Tees with the Tees Valley Regeneration's £320 million North Shore development on the north bank.

Built at a cost of £15 million with funding from Stockton Borough Council, English Partnerships and its successor body the Homes and Communities Agency, One NorthEast, and the European Regional Development Fund the bridge is a major part of the North Shore Redevelopment Project undertaken by Tees Valley Regeneration.

The bridge had the project title North Shore Footbridge before being given its official name Infinity Bridge, chosen by a panel made from the funding bodies, using names suggested by the public. The name derives from the infinity symbol formed by the bridge and its reflection.

Initial investigations for the footbridge were done by the White Young Green Group who with English Partnerships produced a brief for an international architectural design competition organised with RIBA Competitions and launched in April 2003. The brief was for a "prestigious" and "iconic" "landmark" footbridge at North Shore Stockton, to cross the River Tees which is 125 m wide at that point.


...
Wikipedia

...