*** Welcome to piglix ***

Holden FE

Holden FE
1956-58 FE Special Sedan Ascot Grey==.JPG
Holden Special Sedan
Overview
Manufacturer Holden (General Motors)
Also called Holden Standard
Holden Business Sedan
Holden Special
Holden Utility
Holden Panel Van
Production 1956-1958
Body and chassis
Class Mid-size
Body style 4-door sedan
5-door station wagon
2-door coupé utility
2-door panel van
Layout FR layout
Powertrain
Engine 2.2 L (132.5 cu in) I6
Transmission 3spd manual
Dimensions
Wheelbase 105.0 inches (2667mm)
Length 176.0 inches (4470mm)
Width 67.0 inches (1702mm)
Height 61.0 inches (1549mm)
Curb weight 2380lb (1080kg)
Chronology
Predecessor Holden FJ
Successor Holden FC

The Holden FE is an automobile which was produced by Holden in Australia from 1956 to 1958. It was also the first Holden to be assembled in New Zealand, where General Motors New Zealand built their first example on 31 January 1957.

The FE models were built on a longer wheelbase than the FJ series Holdens which they replaced and they featured totally different styling, the FJ models having used a body shape carried over from the original Holden 48-215 series introduced in 1948. A single piece windscreen was now fitted and other improvements included a 12 volt electrical system (replacing the previous 6 volt system), improved steering, a front stabiliser bar and wider wheel rims. All models used a 2262 cc in-line six cylinder engine, coupled with a 3 speed manual gearbox. Engine improvements over the FJ included the use of bigger valves and the lifting of the compression ratio to 6.8:1, which increased the power output from 45 kW (60 hp) to 53 kW (71 hp).

The seven Holden FE models series were marketed as follows:

When introduced in July 1956, the FE range consisted of the Holden Standard Sedan, Holden Business Sedan and Holden Special Sedan, the names designating different levels of equipment and interior trim. The existing FJ series Holden Utility and Holden Panel Van models continued alongside the new sedans, with the FE Utility replacing its FJ counterpart in February 1957. Two station wagon models, the Holden Standard Station Sedan and the Holden Special Station Sedan were released in March 1957, marking the first time that Holden had included a wagon in its range since the marque was introduced in 1948. The FE Panel Van replaced its FJ predecessor in May 1957, bringing the FE range up to its full complement of seven models.

The FE was also the first Holden to be assembled locally in New Zealand, in 1957 and 1958.

Holden Standard sedan

Holden Standard sedan

Holden Special sedan

Holden Special Station Sedan

Holden Business sedan

Holden Business sedan

Holden Panel Van (with non-standard wheels)

Holden Panel Van (with non-standard wheels)

Holden Utility

Holden Utility

After a production run of 155,161 vehicles the entire FE range was replaced by the Holden FC series in July 1958.


...
Wikipedia

...