High Street Bridge

High Street Bridge
Aerial view in 2010
Coordinates	37°45′52″N 122°13′30″W / 37.7645°N 122.2250°W / 37.7645; -122.2250Coordinates: 37°45′52″N 122°13′30″W / 37.7645°N 122.2250°W / 37.7645; -122.2250
Carries	cars and trucks on High Street
Crosses	Oakland Estuary
Locale	San Francisco Bay Area
Characteristics
Design	Double-leaf bascule
Material	steel
Total length	250 ft (76 m)
Width	37 ft (11 m) overall 24 ft (7.3 m) roadway 6 ft (1.8 m) sidewalk
Clearance above	15 ft 6 in (4.72 m)
Clearance below	14 ft 6 in (4.42 m) (high tide) 21 ft (6.4 m) (low tide)
No. of lanes	2
History
Opened	1894, December 1939
Rebuilt	1901, 1939
Statistics
Daily traffic	30,000
High Street Bridge Location in Oakland, California Show map of Oakland, California High Street Bridge Location in Oakland, California Show map of San Francisco Bay Area High Street Bridge Location in Oakland, California Show map of California

The High Street Bridge is a double-leaf bascule drawbridge spanning 296 feet of the Oakland Estuary in the San Francisco Bay Area, California, United States. It links the cities of Oakland and Alameda. The bridge is opened approximately 1,400 times a year. The bridge carries an average of 26,000 vehicles per year. The bridge was built when the Oakland Estuary was trenched, converting Alameda from a peninsula to an island.

The High Street Bridge is one of the four bridges and two tunnels that allow access to Alameda.

The estuary was originally spanned by an iron swing bridge, completed in 1894 by the Harrison Bridge Company for $24,747. In May 1901 a fire destroyed the swing span and part of the approaches, which were rebuilt the following year. Three bridges were built by the federal government in 1901 at High Street (road), Park Street (road), and Fruitvale Avenue (combined road and rail) in exchange for permission and rights-of-way to dredge the channel between San Antonio Creek and San Leandro Bay.

After the three bridges were completed, they were left closed to allow road and rail traffic to pass, but never opened for marine traffic. The northern approach to the High Street Bridge was destroyed by a fire in May 1909, which also damaged the bridge; repairs were performed late in 1909. After pressure was applied by Senator George Clement Perkins and Congressman Joseph R. Knowland, the federal government turned the bridges over to Alameda County in 1910, conditioned on the county assuming responsibility for maintenance, staffing, and operation.

The present bridge was designed by the County of Alameda Surveyors Office and constructed under the Federal WPA Program in 1939 at a cost of $750,000. It opened in December 1939.