Gas-Operated

Gas-operation is a system of operation used to provide energy to operate autoloading firearms. In gas operation, a portion of high-pressure gas from the cartridge being fired is used to power a mechanism to extract the spent case and insert a new cartridge into the chamber. Energy from the gas is harnessed through either a port in the barrel or a trap at the muzzle. This high-pressure gas impinges on a surface such as a piston head to provide motion for unlocking of the action, extraction of the spent case, ejection, cocking of the hammer or striker, chambering of a fresh cartridge, and locking of the action. The first gas-operated rifle was designed by Karel Krnka in 1883.

Most current gas systems employ some type of piston. The face of the piston is acted upon by gas from the combustion of the propellant from the barrel of the firearm. Early methods such as Browning's 'flapper' prototype, the Bang rifle, and Garand rifle used relatively low-pressure gas from at or near the muzzle. This, combined with more massive operating parts, reduced the strain on the mechanism. To simplify and lighten the firearm, gas from nearer the chamber needed to be used. This gas is of extremely high pressure and has sufficient force to destroy a firearm unless it is regulated somehow. Several methods are employed to regulate the energy. The M1 carbine incorporates a very short piston, or "tappet". This movement is closely restricted by a shoulder recess. Excess gas is then vented back into the bore. The M14 rifle and M60 GPMG use the White expansion and cutoff system to stop (cut off) gas from entering the cylinder once the piston has traveled a short distance. Most systems, however, vent excess gas into the atmosphere through slots, holes, or ports.

...
Wikipedia