|
|||
Names | |||
---|---|---|---|
Preferred IUPAC name
Ethyl formate
|
|||
Systematic IUPAC name
Ethyl methanoate
|
|||
Identifiers | |||
3D model (Jmol)
|
|||
ChEBI | |||
ChemSpider | |||
ECHA InfoCard | 100.003.384 | ||
UNII | |||
|
|||
|
|||
Properties | |||
C3H6O2 | |||
Molar mass | 74.08 g·mol−1 | ||
Appearance | Colorless liquid | ||
Odor | fruity | ||
Density | 0.917 g/cm3 | ||
Melting point | −80 °C; −112 °F; 193 K | ||
Boiling point | 54.0 °C (129.2 °F; 327.1 K) | ||
9% (17.78°C) | |||
Vapor pressure | 200 mmHg (20°C) | ||
-43.00·10−6 cm3/mol | |||
Hazards | |||
Flash point | −20 °C; −4 °F; 253 K | ||
Explosive limits | 2.8% - 16.0% | ||
Lethal dose or concentration (LD, LC): | |||
LD50 (median dose)
|
1850 mg/kg (rat, oral) 1110 mg/kg (guinea pig, oral) 2075 mg/kg (rabbit, oral) |
||
LCLo (lowest published)
|
10,000 ppm (cat, 1.5 hr) 8000 ppm (rat, 4 hr) |
||
US health exposure limits (NIOSH): | |||
PEL (Permissible)
|
TWA 100 ppm (300 mg/m3) | ||
REL (Recommended)
|
TWA 100 ppm (300 mg/m3) | ||
IDLH (Immediate danger)
|
1500 ppm | ||
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
|||
what is ?) | (|||
Infobox references | |||
Ethyl formate is an ester formed when ethanol (an alcohol) reacts with formic acid (a carboxylic acid). It is also known as ethyl methanoate because formic acid is also known as methanoic acid. Ethyl formate has the characteristic smell of rum and is also partially responsible for the flavor of raspberries. It occurs naturally in the body of ants and in the stingers of bees.
Ethyl methanoate is generally recognized as safe by the U.S. Food and Drug Administration.
According to the U.S Occupational Safety and Health Administration (OSHA), ethyl formate can irritate eyes, skin, mucous membranes, and the respiratory system of humans and other animals; it is also a central nervous system depressant. In industry, it is used as a solvent for cellulose nitrate, cellulose acetate, oils, and greases. It can be used as a substitute for acetone; workers may also be exposed to it under the following circumstances:
OSHA considers a time-weighted average of 100 parts per million (300 milligrams per cubic meter) over an eight-hour period as the permissible exposure limit. The U.S. National Institute for Occupational Safety and Health (NIOSH) also considers a time-weighted average of 100 ppm over an eight-hour period as the recommended exposure limit.