EMC E3

EMC E3

ACL #501 at the North Carolina Transportation Museum.

Type and origin Power type Diesel-electric Builder Electro-Motive Corporation (EMC) Model E3 Build date September 1938 – June 1940 Total produced 17 A units, 2 B units

Specifications AAR wheel arr. A1A-A1A Gauge 4 ft 8 1⁄2 in (1,435 mm) Trucks EMC Blomberg A-1-A passenger Wheel diameter 36 in (914 mm) Minimum curve 21° (274.37 ft or 83.63 m radius) Wheelbase 57 ft 1 in (17.40 m) Length 70 ft 4 in (21.44 m) over coupler Width 10 ft 7 in (3.23 m) Height 15 ft 10 in (4.83 m) Loco weight 308,400 lb (139,900 kg) Fuel capacity 1,200 US gal (1,000 imp gal; 4,500 L) Prime mover (2) EMC 567 RPM range 800 max Engine type (2) V12 Two-stroke diesel Aspiration Roots-type supercharger Displacement 6,804 cu in (111.50 L) each Generator (2) EMC D-4 Traction motors (4) EMC D-7 Cylinders (2) 12

Performance figures Power output 2,000 hp (1,490 kW) total

Career Disposition one preserved and in mostly static display at the North Carolina Transportation Museum

The EMC E3 is a 2,000 horsepower (1,500 kW), A1A-A1A passenger train locomotive that was manufactured by Electro-Motive Corporation of La Grange, Illinois. The EMC demonstrator #822 was released from La Grange for test on September 12, 1938. The cab version, or E3A, was manufactured from September 1938 to June 1940, and 17 were produced. The booster version, or E3B, was manufactured in March 1939 and September 1939, and 2 were produced. The 2,000 hp (1,500 kW) was achieved by putting two 1,000 horsepower (750 kW), 12-cylinder, model 567 engines in the engine compartment. Each engine drove its own electrical generator to power the traction motors. The E3 was the fourth model in a long line of passenger diesels of similar design known as EMD E-units.

Compared with passenger locomotives made later by EMD, the noses of the E3, E4, E5, and E6 cab units had pronounced slants when viewed from the side. Therefore, these four models have been nicknamed "slant nose" units. Later E models had the "bulldog nose" of the F series. E3 demonstrator 822 was built with a nose identical to earlier EA and E1A units, but later locomotives in the series featured an elevated headlamp mounted in a nacelle, distinct from the flush profile mounting of the earlier units. 822 was modified in a similar fashion prior to delivery to the Kansas City Southern

The E3 introduced a 12-cylinder version of the 567 series engine, two were used, developing a total of 2,000 hp at 800 rpm. Earlier E models had used twin Winton 201As, but that engine was ill-suited to railroad use and was unreliable. The 567 was designed specifically for railroad locomotives, a supercharged 2 stroke 45 degree V type with 567 cubic inches (9,290 cm³; 9.29 L) displacement per cylinder which remained in production until 1966. Two D.C. generators, one per engine, provide power to four motors, two on each truck, in an A1A-A1A arrangement. This truck design was used on all E units and on MP 7100, CB&Q 9908, and Rock Island EB6 power cars. EMC/EMD has built all of its major components since 1939.