Digital recording

In digital recording, audio signals picked up by a microphone or other transducer or video signals picked up by a camera or similar device are converted into a stream of discrete numbers, representing the changes over time in air pressure for audio, and chroma and luminance values for video, then recorded to a storage device. To play back a digital sound recording, the numbers are retrieved and converted back into their original analog waveforms so that they can be heard through a loudspeaker. To play back a digital video recording, the numbers are retrieved and converted back into their original analog waveforms so that they can be viewed on a video monitor, television or other display.

Recording

Playback

Even after getting the signal converted to bits, it is still difficult to record; the hardest part is finding a scheme that can record the bits fast enough to keep up with the signal. For example, to record two channels of audio at 44.1 kHz sample rate with a 16 bit word size, the recording software has to handle 1,411,200 bits per second.

For digital cassettes, the read/write head moves as well as the tape in order to maintain a high enough speed to keep the bits at a manageable size.

For optical disc recording technologies such as CDs or DVDs, a laser is used to burn microscopic holes into the dye layer of the medium. A weaker laser is used to read these signals. This works because the metallic substrate of the disc is reflective, and the unburned dye prevents reflection while the holes in the dye permit it, allowing digital data to be represented.

...
Wikipedia