Cyclops Camera

Cromemco Cyclops Camera

First all-digital solid-state camera.
Overview
Maker	Cromemco
Lens
Lens mount	D-mount
Lens	25mm f2.8
Sensor/Medium
Sensor	modified 1kb RAM IC
Image sensor type	digital
Maximum resolution	32 × 32 pixels, 4 bits per pixel
Shutter
Frame rate	30 Hz
Released	1975

The Cyclops Camera, introduced in 1975 by Cromemco, was the first commercial all-digital camera using a digital MOS area image sensor. It was also the first digital camera to be interfaced to a microcomputer. The digital sensor for the camera was a modified 1K memory chip that offered a resolution of 32 × 32 pixels (0.001 megapixels).

The Cyclops Camera was developed by Terry Walker, Harry Garland, and Roger Melen, and introduced as a hobbyist construction project in the February 1975 issue of Popular Electronics magazine.

One month earlier the MITS Altair 8800 microcomputer had been introduced in this same magazine. Les Solomon, technical editor of Popular Electronics, saw the value of interfacing the Cyclops to the Altair, and put Roger Melen (co-developer of the Cyclops) in contact with Ed Roberts (president of MITS) to discuss a collaboration.

Roger Melen met with Ed Roberts at MITS headquarters in Albuquerque, New Mexico. Roberts encouraged Melen to interface the Cyclops to the Altair, promising to ship Melen an early Altair computer so that he and his colleagues could begin work on this project.

Roger Melen formed a partnership with Harry Garland to produce the Cyclops Camera, and other products for the Altair computer. They named their new venture "Cromemco" after the Stanford University dormitory (Crothers Memorial Hall) where they both had lived as graduate students. In January 1976 MITS introduced the Cromemco Cyclops Camera as the first peripheral for the Altair Computer.

The Cyclops Camera used an innovative image sensor that was actually a modified MOS computer memory chip. The opaque cover on the chip was removed and replaced with a glass lid. The theory of operation was described in the original Popular Electronics article. Initially the 1024 memory locations, which were arranged in a 32 × 32 array, were filled with all 1s. Light shining on these memory cells would cause their contents to change to 0s. The stronger the light, the more quickly a cell would change from 1 to 0.

The Cyclops used a 25mm f2.8 D-mount lens to focus an image on the sensor array. The memory array was scanned once to store all 1’s in the memory elements. This was quickly followed by a series of 15 read-out scans. The cells that had the most incident light (i.e. the brightest parts of the picture) changed from 1 to 0 the soonest. Cells with little or no incident light (i.e. the darkest areas of the picture) would not change at all. So with a series of scans the Cyclops could produce a digital, gray-scale representation of the image.