Briz-KM
| Manufacturer | Khrunichev |
|---|---|
| Country of origin | Russia |
| General characteristics | |
| Diameter | 2.5 metres (8 ft 2 in) |
| Length | 2.60 metres (8 ft 6 in) |
| Gross mass | 6,475 kilograms (14,275 lb) |
| Propellant mass | 5,055 kilograms (11,144 lb) |
| Engine details | |
| Engines | 1 S5.98M |
| Thrust | 19.6 kN (4,400 lbf) |
| Specific impulse | 326 s |
| Burn time | 3000 seconds |
| Fuel | N2O4/UDMH |
| Manufacturer | Khrunichev |
|---|---|
| Country of origin | Russia |
| General characteristics | |
| Diameter | 4.10 metres (13.5 ft) |
| Length | 2.61 metres (8 ft 7 in) |
| Gross mass | 22,500 kilograms (49,600 lb) |
| Propellant mass | 20,000 kilograms (44,000 lb) |
| Engine details | |
| Engines | 1 S5.98M |
| Thrust | 19.6 kN (4,400 lbf) |
| Specific impulse | 326 s |
| Burn time | 3000 seconds |
| Fuel | N2O4/UDMH |
The Briz-K, Briz-KM and Briz-M (Russian: Бриз-К, КM and M meaning Breeze-K, KM and M) are Russian liquid-propellant rocket orbit insertion upper stages manufactured by Khrunichev State Research and Production Space Center and used on the Proton-M, Angara A5 or Rokot, one of Russia's smaller launchers.
Briz-K, GRAU index 14S12, is a single-piece structure with a conical tank compartment and the engine located in a recess in the fuel tank. Briz-KM (GRAU index 14S45) is an improved version of Briz-K. The Briz-K and Briz-KM is used as a third stage of the Rokot launch vehicles.
Briz-M, GRAU index 14S43, is designed for injecting large payloads into a low, medium-height or high geosynchronous orbit. Briz-M is a twin upper stage consisting of a core module (using Briz-KM as the baseline) and a jettisonable add-on doughnut tank surrounding the core. It is powered by a pump-fed gimballed main engine, the 14D30. The main engine can be restarted 8 times in flight and allows precision placement of the spacecraft into orbit. Orbital lifetime of the Briz-M is limited by available onboard battery power and is currently 24 hours. The total time of the standard Proton/Briz-M mission to geosynchronous orbit profile from lift-off to spacecraft separation is approximately 9.3 hours. A Proton launch vehicle with a Briz-M upper stage can also inject payloads to Earth escape trajectories.
One of system's design goals has been to keep overall dimensions as small as possible. Briz-M takes much less space on board the launch vehicle compared to its predecessor, the Block D upper stage, leaving freed volume for the cargo. A Proton with a Briz-M can place a 4,385 kg satellite, such as an A2100AX, into a target orbit with an apogee of 35,786 km, a perigee of 7,030 km, and an inclination of 17.3°. Maximum lift capability of the Briz-M stage is 5,645 kg to geosynchronous transfer orbit with a 1,500 m/s residual velocity to GSO. A tandem launch of multiple spacecraft is also supported, with the ability to inject the spacecraft into different orbits.
...
Wikipedia