Bristol 188
| Bristol 188 | |
|---|---|
 |
|
| Bristol 188 at the Royal Air Force Museum Cosford | |
| Role | Experimental aircraft |
| Manufacturer | Bristol Aeroplane Company |
| First flight | 14 April 1962 |
| Retired | 1964 |
| Status | Experimental |
| Primary user | Royal Aircraft Establishment |
| Number built | 3 (one static test, two flight test prototypes) |
The Bristol 188 was a British supersonic research aircraft built by the Bristol Aeroplane Company in the 1950s. Its length, slender cross-section and intended purpose led to its being nicknamed the "Flaming Pencil".
The aircraft had its genesis in Operational Requirement 330 for a high speed (Mach 3) reconnaissance aircraft, which eventually developed into the Avro 730. As the 730 was expected to operate at high speeds for extended periods of time, more data was needed on high speed operations, leading to Operational Requirement ER.134T for a testbed capable of speeds greater than Mach 2. The aircraft was expected to run at these speeds for extended periods of time, allowing it to study kinetic heating effects on such an aircraft. The aircraft was expected to spend a considerable amount of time with a skin temperature around 300 Celsius.
Several firms took interest in this very advanced specification and the eventual contract (6/Acft/10144) was awarded to Bristol Aircraft in February 1953.
Bristol gave the project the type number 188, of which three aircraft were to be built, one a pure test bed and the other two (constructor numbers 13518 and 13519) for flight testing. Under contract number KC/2M/04/CB.42(b) serial numbers XF923 and XF926 were given on 4 January 1954 to the two that would fly. To support the development of the Avro 730 Mach 3 reconnaissance bomber, another three aircraft were ordered (Serial Numbers XK429, XK434 and XK436). The follow-up order was cancelled when the Avro 730 programme was cancelled in 1957 as part of that year's review of defence spending. The 188 project was continued as a high speed research aircraft.
The advanced nature of the aircraft meant that new construction methods had to be developed. Several materials were considered for construction and two specialist grades of steel were selected: a titanium-stabilized 18-8 austenitic steel and a 12%-Cr steel used in gas turbines (Firth-Vickers Rex 448). These had to be manufactured to better tolerances in sufficient quantities for construction to start. The 12% chromium stainless steel with a honeycomb centre was used for the construction of the outer skin, to which no paint was applied. Riveting was a potential method for construction but the new arc welding technique using an Argon gas shield known as puddle welding was used. There were long delays with the method, which was less than satisfactory. The W. G. Armstrong Whitworth company provided substantial technical help and support to Bristol during this period; they produced major sections of the airframe as a subcontractor.
...
Wikipedia