*** Welcome to piglix ***

Bentley Azure (1995)

Bentley Azure Mark I
Bentley Azure first, top-up.jpg
Overview
Manufacturer Bentley Motors Limited
Production 1995–2003
Assembly Crewe, England, and Cambiano, Italy
Body and chassis
Class Grand tourer
Body style 2-door convertible
Layout FR layout
Related Bentley Continental R
Bentley Brooklands
Rolls-Royce Corniche (2000)
Powertrain
Engine 6.75 L L410 MT 1T turbo V8
Dimensions
Wheelbase 3,060 mm (120 in)
Length 5,340 mm (210 in)
Width 1,880 mm (74 in)
Height 1,480 mm (58 in)
Kerb weight 2,610 kg (5,754 lb)
Chronology
Predecessor Bentley Continental
Bentley Azure Mark II
Bentley Azure, Amagansett (10005087005).jpg
Overview
Manufacturer Bentley Motors Limited
Production 2006–2009
Assembly Crewe, England
Body and chassis
Class Grand tourer
Body style 2-door convertible
Layout FR layout
Related Bentley Arnage
Bentley Brooklands Coupé
Powertrain
Engine 6.75 L Bentley V8
Dimensions
Wheelbase 122.7 in (3,117 mm)
Length 212.3 in (5,392 mm)
Width 1,900 mm (74.8 in) (w/mirrors: 2,125 mm (83.7 in))
Height 55.0 in (1,397 mm)
Kerb weight 5,941 lb (2,695 kg)

The Bentley Azure is a large, four seater convertible built by Bentley Motors Limited at its factory in Crewe, England. The model debuted in 1995 on the Bentley Continental R platform and was produced until 2003. After a three-year break a completely new version powered by a significantly updated engine and riding on the newer Arnage platform debuted in 2006. According to 2009 research by internet company Yahoo!, the Azure is the fourth most fuel consuming car on sale in the United Kingdom.

The Azure debuted in March 1995 at the Geneva Motor Show on the platform of the Continental R model, which had been originally launched in 1991. Production only crept to a start, with a mere nine examples finished in the first year – in 1996, after full production had started, no less than 251 Azures were finished.Pininfarina assisted in the two-year process of turning the Continental R into a full four-seater convertible, and also built the shell and soft-top at their factory in Italy, largely from parts sourced in the UK. Final assembly was then carried out at Crewe. A roll-bar was never considered, which necessitated extensive reinforcing of the chassis. At 210 in (5,340 mm) in length and 5,750 pounds (2,610 kg) in weight, the Azure often surprised onlookers with its size and bulk, intended to both convey a sense of "presence" and allow for comfortable seating of four adult passengers.

Power came from the company's stalwart 6.75-litre V8, featuring a single, intercooled Garrett turbocharger and producing in the region of 360 hp – Rolls-Royce and Bentley did not yet give official power numbers at the time of the Azure's introduction. By the time production began in earnest, new engine management from Zytek meant a slight power increase to 385 hp (287 kW; 390 PS) at 4,000 rpm and 750 N·m (553 lb·ft) of torque at 2,000 rpm; power was routed to the rear wheels via a modified, General Motors sourced, four-speed automatic transmission. With a zero to sixty miles per hour time of 6.3 seconds (0–100 km/h in 6.5 s) and a top speed of 241 km/h (150 mph), the Azure was very fast for a car of its size, weight and poor aerodynamic profile.


...
Wikipedia

...