*** Welcome to piglix ***

Amplitude modulator


Amplitude modulation (AM) is a modulation technique used in electronic communication, most commonly for transmitting information via a radio carrier wave. In amplitude modulation, the amplitude (signal strength) of the carrier wave is varied in proportion to the waveform being transmitted. That waveform may, for instance, correspond to the sounds to be reproduced by a loudspeaker, or the light intensity of television pixels. This technique contrasts with frequency modulation, in which the frequency of the carrier signal is varied, and phase modulation, in which its phase is varied.

AM was the earliest modulation method used to transmit voice by radio. It was developed during the first two decades of the 20th century beginning with Roberto Landell De Moura and Reginald Fessenden's radiotelephone experiments in 1900. It remains in use today in many forms of communication; for example it is used in portable two way radios, VHF aircraft radio, Citizen's Band Radio, and in computer modems (in the form of QAM). "AM" is often used to refer to mediumwave AM radio broadcasting.

In electronics and telecommunications, modulation means varying some aspect of a higher frequency continuous wave carrier signal with an information-bearing modulation waveform, such as an audio signal which represents sound, or a video signal which represents images, so the carrier will "carry" the information. When it reaches its destination, the information signal is extracted from the modulated carrier by demodulation.


...
Wikipedia

...