Zengamina

Zengamina
Location of Zengamina in Zambia
Country	Zambia
Location	Kalene Hill
Coordinates	11°07′26″S 24°11′32″E / 11.123939°S 24.192152°E / -11.123939; 24.192152Coordinates: 11°07′26″S 24°11′32″E / 11.123939°S 24.192152°E / -11.123939; 24.192152
Status	Operational
Construction began	2004
Opening date	2008
Construction cost	$3 million

Zengamina is a small hydroelectric power generation plant near Kalene Hill, Mwinilunga District in northwestern Zambia. It was built between 2004 and 2008 at a cost of about $3 million, or $4,285 per kilowatt of power.

Before the power plant was opened most people had no electricity, using wood or kerosene for cooking. Those who could afford it used diesel generators to provide electricity. The Zambian national electricity grid ends 380 kilometres (240 mi) from the Ikelenge area. The local people were trapped in a poverty cycle, living through unsustainable slash-and-burn subsistence farming.

The Zengamina project aimed to provide a reliable electrical supply with a small hydroelectrical station on the Zambezi River at a fast-moving point close to its source. The Zambezi at this location drops 17 metres (56 ft) over a 350-metre (1,150 ft) length of rapids. The potential for power generation on the Zambezi rapids was identified in 1964, but without funding nothing was done.

In 2001 Dr Peter Gill, an orthopedic surgeon in the United Kingdom, launched a trust to fund the project. The primary motive was to reduce the cost of providing electricity to the Kalene hospital, which serves people in Angola and the Democratic Republic of the Congo as well as Zambia, in a period when diesel fuel costs were continuing to rise. The Zambian government provided some seed funding, and church groups in Britain managed to raise another $2.5 million to cover construction costs.

Construction of the 0.7 megawatts (940 hp) facility began in March 2004. The project was initiated by the North West Zambia Development Trust, a small charity associated with the mission station at Kelene Hill. Construction mostly used local labor, with little machinery. This included building a 100-metre (330 ft) weir, 400-metre (1,300 ft) canal parallel to the river leading to a headpond, 70-metre (230 ft) , powerhouse building and tailrace. The electrical system includes a cross-flow turbine, a 400v/33kV step-up transformer, 35 kilometres (22 mi) of 33kV line and 10 kilometres (6.2 mi) of 400V line.

The take-off weir is low, has little impact on the river and causes no risk to flora or fauna. The facilities are inconspicuous and require little effort to maintain. Most of the construction was of mortar and masonry using local granite that had been blasted to clear the canal. This approach greatly reduced costs, while making the structure blend with its surroundings. A local community school and church were also built using materials, transport and expertise provided for the hydro project.