*** Welcome to piglix ***

Yūgumo-class destroyer

Naganami
Naganami in June 1942.
Class overview
Name: Yūgumo-class destroyer
Builders:
Operators: Naval Ensign of Japan.svg Imperial Japanese Navy
Preceded by: Kagerō class
Succeeded by: Matsu class
Built: 1940–1944
In commission: 1941–1945
Planned: 14 (1939) + 16 (1941) + 8 (1942)
Completed: 19
Cancelled: 19
Lost: 19
General characteristics
Displacement:
  • 2,077 tons standard,
  • 2,520 tons battle condition
Length:
  • 119.03 m (390 ft 6 in) overall,
  • 117.00 m (383 ft 10 in) waterline
Beam: 10.80 m (35 ft 5 in)
Draft: 3.76 m (12 ft 4 in)
Propulsion:
  • 3 × Kampon water tube boilers,
  • 2 × Kanpon impulse geared turbines,
  • 52,000 shp (39 MW), 2 shafts
Speed: 35.5 knots (40.9 mph; 65.7 km/h)
Range: 5,000 nmi (9,300 km) at 18 kn (21 mph; 33 km/h)
Complement: 225 (Yūgumo, 1941)
Armament:

The Yūgumo-class destroyers (夕雲型駆逐艦 Yūgumo-gata kuchikukan?) were a group of 19 destroyers built for the Imperial Japanese Navy during World War II. The IJN called them Destroyer Type-A (甲型駆逐艦, Kō-gata Kuchikukan?) from their plan name. No ships of the class survived the war.

The Yūgumo class was a repeat of the preceding Kagerō class with minor improvements that increased their anti-aircraft capabilities. Their crew numbered 228 officers and enlisted men. The ships measured 119.17 meters (391 ft 0 in) overall, with a beam of 10.8 meters (35 ft 5 in) and a draft of 3.76 meters (12 ft 4 in). They displaced 2,110 metric tons (2,080 long tons) at standard load and 2,560 metric tons (2,520 long tons) at deep load. The ships had two Kampon geared steam turbines, each driving one propeller shaft, using steam provided by three Kampon water-tube boilers. The turbines were rated at a total of 52,000 shaft horsepower (39,000 kW) for a designed speed of 35 knots (65 km/h; 40 mph).


...
Wikipedia

...