Wingnut (hardware)
A wingnut or wing nut is a type of nut with two large metal "wings", one on each side, so it can be easily tightened and loosened by hand without tools.
A similar fastener with a male thread is known as a wing screw or a wing bolt.
Three wingnuts
Bicycle wingnuts
Three wingnuts securing a cymbal and its mounting
Three wingnuts and wingbolts supporting a drum
ASME B18.6.9 classifies wing nuts first by manufacturing method and then by style.
Before the development of quick release skewers, bicycle wheels were held in place with wingnuts.
In a drum kit wingnuts and wingbolts are used extensively.
In drum hardware, memory refers to any system that preserves the adjustment of a stand, boom or bracket when the kit is disassembled.
Most commonly this takes the form of a collar on a tube, fixed in place by a screw operated by a drum key. This collar mates with a fitting that receives the tube and secures it by means of a wingnut or wingbolt. When the stand is disassembled, only the wingnut or wingbolt needs to be loosened, and the collar remains in place, allowing the stand to be reassembled in exactly the same adjustment. When the stand needs to be adjusted, the collar is first loosened by means of a drum key.
The device that surrounds a CO2 cartridge in a seltzer bottle is also a wingnut. Twisting the wingnut completes a seal around the cartridge neck; twisting a bit more causes a pin to pierce the cartridge and let the gas into the bottle.
...
Wikipedia