Westinghouse Combustion Turbine Systems Division

Part of Westinghouse Electric Corporation's Westinghouse Power Generation group, the Westinghouse Combustion Turbine Systems Division (CTSD) was originally located, along with the Steam Turbine Division (STD), in a major industrial manufacturing complex, referred to as the South Philadelphia Works, in Lester, PA near to the Philadelphia International Airport.

Before first being called "CTSD" in 1978, the Westinghouse industrial and electric utility gas turbine business operation progressed through several other names starting with Small Steam & Gas Turbine Division (SSGT) in the 1950s through 1971, then Gas Turbine Systems Division (GTSD) and Generation Systems Division (GSD) through the mid-late 1970s.

The name CTSD came with the passage of energy legislation by the US government in 1978 which prohibited electric utilities from building new base load power plants that burned natural gas. Some participants in the industry decided to use the name "combustion turbine" in an attempt to gain some separation from the fact that the primary fuel for gas turbines in large power plants is natural gas.

Commonly referred to as a gas turbine, a modern combustion turbine can operate on a variety of gaseous and liquid fuels. The preferred liquid fuel is No. 2 distillate. With proper treatment, crude and residual oil have been used. Fuel gases range from natural gas (essentially methane) to low-heating-value gases such as produced by gasification of coal or heavy liquids, or as by-product gases from blast furnaces. In fact, most gas turbines today are installed with dual- or multi-fuel capability to take advantage of changes in cost and availability of various fuels.

The story of Westinghouse gas turbine experience lists the many "firsts" achieved during the more than 50 years prior to the sale of the Power Generation Business Unit to Siemens, AG in 1998. As indicated below, the history actually begins with the successful development of the first fully US-designed jet engine during World War II. The first industrial gas turbine installation took place in 1948 with the installation of a 2000 hp W21 at Mississippi River Fuel Corp. gas compression station at Wilmar, Arkansas, USA.

Westinghouse has a long history in the industrial and electric power steam turbine industry dating back to the late 1800s and early 1900s. The steam turbine manufacturing plant in Lester, PA was built in 1917-1919 greatly expanding the company's manufacturing capacity. "The South Philadelphia Works" as it was known become a key part of the original Westinghouse Electric Company's industrial complex, complementing other large factories in East Pittsburgh, PA and Hamilton, Ontario.

...
Wikipedia