Vane shock absorber

Lever arm shock absorbers were the first form of hydraulic shock absorber or damper used for car suspension. They appeared in the 1930s and were most commonly used in the 1950s and 1960s, but were replaced by telescopic shock absorbers in the 1970s. One of the earliest patents for a hydraulic lever arm shock absorber was awarded in 1925 to Georges de Ram, who was already an established maker of friction disk shock absorbers.

Hydraulic shock absorbers appeared as a development to replace the previous friction disks. These had, at best, provided a constant damping force, no matter what the size or speed of the suspension movement. With a viscous device using hydraulic oil, the resistance force increased with speed, so providing better damping for larger suspension bumps.

The first hydraulic shock absorbers were of the rotary vane pattern. These consisted of a cylindrical oil-filled body, bolted to the chassis. A lever arm was attached to the axle and inside the cylinder, this rotated a spindle carrying a vane or paddle. This vane had only a small hole in it, through which the hydraulic oil could pass. Resistance to flow through the hole provided the damping effect.

These were first developed by Maurice Houdaille around 1906, but remained largely ignored in favour of the simpler friction devices for some years.

This type was most common pre-war, although Ferrari continued to use the Houdaille vane-type for Formula One racing cars into the late 1950s.

A post-war development was the lever shock absorber. This had a large cast body containing a cylinder and pistons attached to a similar spindle and lever arm. Some used a pair of pistons for bump and rebound, others used a single double-acting piston. Flow of hydraulic oil around the piston took place through valves mounted in the body. Separate valves were provided for each direction, giving the useful feature of a different resistance to bump and rebound. These valves were sometimes easily adjustable from outside the damper body.

Many cars of this period began to use independent front suspension, often a double wishbone. The upper wishbone could conveniently also be used as the lever of the shock absorber, reducing the mass and bulk of the suspension, and also avoiding at least one ball joint. The spindle of the shock absorber now became the upper suspension pivot, usually double-ended.

...
Wikipedia