*** Welcome to piglix ***

Twister II

Twister II
TwisterII.jpg
Twister II, the ride is based on the original Elitch Gardens' Mr. Twister roller coaster.
Elitch Gardens
Coordinates 39°44′47″N 105°00′52″W / 39.74639°N 105.01444°W / 39.74639; -105.01444Coordinates: 39°44′47″N 105°00′52″W / 39.74639°N 105.01444°W / 39.74639; -105.01444
Status Operating
Opening date May 27, 1995
General statistics
Type Wood
Manufacturer Hensel Phelps Construction
Designer John Pierce
Model custom
Track layout Twister
Lift/launch system Chain lift hill
Height 100 ft (30 m)
Drop 91 ft (28 m)
Length 4,640 ft (1,410 m)
Speed 55 mph (89 km/h)
Inversions 0
Duration 2:17
Max vertical angle 56°
Capacity 1200 riders per hour
G-force 3.1
Height restriction 48 in (122 cm)
Trains 4 cars. Riders are arranged 2 across in 3 rows for a total of 24 riders per train.
Twister II at RCDB
Pictures of Twister II at RCDB

Twister II is a wooden roller coaster located at Elitch Gardens in Denver, Colorado.

This is a custom built wooden coaster based upon the original coaster Mr. Twister that was at Elitch Gardens before the park was moved to its new location in 1995. The roller coaster was designed by John Pierce, who also designed the famous The Rattler wooden roller coaster at Six Flags Fiesta Texas. It was constructed by the Hensel Phelps Construction Co. The trains were made by the Philadelphia Toboggan Coasters company. Twister II is significantly tamer than the original Mr. Twister.

The motto for the ride is "Built wilder the second time around!"

Riders venture through the queue area as it winds through the middle of the coaster's layout. Once riders head into the station area, there are paintings of the original Elitch Gardens' roller coasters hanging on the wall below the boarding area. Riders then board the Philadelphia Toboggan Coasters trains.

Leaving the station, adjacent to the railroad tracks, the track makes a right hand turn to the 100-foot-tall (30 m) lift hill. From the lift hill, riders can view other rides at the park, as well as the Downtown Denver skyline. Leaving the lift hill, trains snake around a swooping 10-foot (3.0 m) drop, mimicking the drop on the original Mister Twister. This is followed by a 90-foot (27 m) drop to the ground, and a rise up into a big turnaround, and another drop. After the second drop, the track goes through a double up type element wrapping around the first drop turn, before making another drop and hill and descending into the big helix. Upon leaving the helix, there is a slight straight segment before dropping to the left, entering a tunnel in the structure of the second turnaround. From the tunnel, a straight segment precedes another turnaround that leads into the final brakes.

Overall, the layout of Twister II has similarities to the Mister Twister, but a noticeable difference is the helix entry. While Mister Twister went down the second drop and into the helix right away, Twister II leaves the second drop and goes up a double up hill, then makes another drop and rise, and enters the helix near the station. Because of this, the entrance to the tunnel does not cross over the second climb.


...
Wikipedia

...