*** Welcome to piglix ***

Tri-service aircraft designation system


The Tri-Service aircraft designation system is a unified system introduced in 1962 by the United States Department of Defense for designating all U.S. military aircraft. Prior to then, the U.S. armed services used separate nomenclature systems.

Under the tri-service designation system, officially introduced on 18 September 1962, almost all aircraft receive a unified designation, whether they are operated by the United States Air Force (USAF), United States Navy (USN), United States Marine Corps (USMC), United States Army, or United States Coast Guard (USCG). Experimental aircraft operated by manufacturers or by NASA are also often assigned designations from the X-series of the tri-service system.

The 1962 system was based on the one used by the USAF between 1948 and 1962, which was in turn based on the Type, Model, Series USAAS/USAAC/USAAF system used from 1924 to 1948. The 1962 system has been modified and updated since introduction.

The designation system produces a Mission-Design-Series (MDS) designation of the form:

Of these components, only the Basic Mission, Design Number and Series Letter are mandatory. In the case of special vehicles a Vehicle Type symbol must also be included. The U.S. Air Force characterizes this designation system as "MDS", while the Navy, and Marine Corps refer to it as Type/Model/Series (T/M/S).

These optional prefixes are attached to aircraft not conducting normal operations, such as research, testing and development. The prefixes are:

A temporary special test means the aircraft is intended to return to normal service after the tests are completed, while permanent special test aircraft are not. The Planning code is no longer used but was meant to designate aircraft "on the drawing board". For example, using this system an airframe such as the F-13 could have initially been designated as ZF-13 during the design phase, possibly XF-13 if experimental testing was required before building a prototype, the YF-13; the final production model would simply be designated F-13 (with the first production variant being the F-13A). Continuing the example, some F-13s during their service life may have been used for testing modifications or researching new designs and designated JF-13 or NF-13; finally after many years of service, the airframe would be permanently grounded due to safety or economic reasons as GF-13.


...
Wikipedia

...