Thrust to weight ratio

Thrust-to-weight ratio is a dimensionless ratio of thrust to weight of a rocket, jet engine, propeller engine, or a vehicle propelled by such an engine that indicates the performance of the engine or vehicle.

The instantaneous thrust-to-weight ratio of a vehicle varies continually during operation due to progressive consumption of fuel or propellant and in some cases a gravity gradient. The thrust-to-weight ratio based on initial thrust and weight is often published and used as a figure of merit for quantitative comparison of the initial performance of vehicles.

The thrust-to-weight ratio can be calculated by dividing the thrust (in SI units – in newtons) by the weight (in newtons) of the engine or vehicle. It is a dimensionless quantity. Note that the thrust can also be measured in pound-force (lbf) provided the weight is measured in pounds (lb); the division of these two values still gives the numerically correct thrust-to-weight ratio. For valid comparison of the initial thrust-to-weight ratio of two or more engines or vehicles, thrust must be measured under controlled conditions.

The thrust-to-weight ratio and wing loading are the two most important parameters in determining the performance of an aircraft. For example, the thrust-to-weight ratio of a combat aircraft is a good indicator of the maneuverability of the aircraft.

The thrust-to-weight ratio varies continually during a flight. Thrust varies with throttle setting, airspeed, altitude and air temperature. Weight varies with fuel burn and changes of payload. For aircraft, the quoted thrust-to-weight ratio is often the maximum static thrust at sea-level divided by the maximum takeoff weight.

In cruising flight, the thrust-to-weight ratio of an aircraft is the inverse of the lift-to-drag ratio because thrust is the inverse of drag, and weight is the inverse of lift.

...
Wikipedia