*** Welcome to piglix ***

Thread (yarn)


Thread is a type of yarn used for sewing.

Thread is made from a wide variety of materials. The following table lists common materials, a general description and what they are supposed to be good for. If your machine will sew with the thread, any thread can used for just about any purpose. This is very useful for someone who is trying to learn sewing. However, it should be remembered that where a thread is stronger than the material that it is being used to join, if seams are placed under strain the material may tear before the thread breaks. Garments are usually sewn with threads of lesser strength than the fabric so that if stressed the seam will break before the garment. Heavy goods that must withstand considerable stresses such as upholstery, car seating, tarpaulins, tents, and saddlery require very strong threads. Attempting repairs with light weight thread will usually result in rapid failure, though again, using a thread that is stronger than the material being sewn can end up causing rips in that material before the thread itself gives way.

Polyester/polyester core spun thread is made by wrapping staple polyester around a continuous polyester filament during spinning and plying these yarns into a sewing thread. Core Spun Thread

Yarns are measured by the density of the yarn, which is described by various units of textile measurement relating to a standardized length per weight. These units do not directly correspond to thread diameter.

The most common weight system specifies the length of the thread in kilometres required to weigh 1 kilogram. Therefore, a greater weight number (indicated in the American standard by the abbreviation wt) indicates a thinner, finer thread. The American standard of thread weight was adopted from the Gunze Count standard of Japan which uses two numbers separated by a forward slash. The first number corresponds to the wt number of the thread and the second number indicates how many strands of fiber were used to compose the finished thread. It is common to wrap three strands of the same weight to make one thread, though this is not a formal requirement in the US standard (which is therefore less informative).


...
Wikipedia

...