Thermomechanical analysis
| Acronym | TMA |
|---|---|
| Classification | Thermal analysis |
| Other techniques | |
| Related |
Dynamic mechanical analysis Thermomechanical analysis Thermogravimetric analysis Differential thermal analysis Dielectric thermal analysis |
Thermomechanical analysis (TMA) is a technique used in thermal analysis, a branch of materials science which studies the properties of materials as they change with temperature.
Thermomechanical analysis is a subdiscipline of the thermomechanometry (TM) technique.
Thermomechanometry is the measurement of a change of a dimension or a mechanical property of the sample while it is subjected to a temperature regime. An associated thermoanalytical method is thermomechanical analysis. A special related technique is thermodilatometry (TD), the measurement of a change of a dimension of the sample with a negligible force acting on the sample while it is subjected to a temperature regime. The associated thermoanalytical method is thermodilatometric analysis (TDA).
TDA is often referred to as zero force TMA. The temperature regime may be heating, cooling at a rate of temperature change that can include stepwise temperature changes, linear rate of change, temperature modulation with a set frequency and amplitude, free (uncontrolled) heating or cooling, or maintaining a constant increase in temperature. The sequence of temperatures with respect to time may be predetermined (temperature programmed) or sample controlled (controlled by a feedback signal from the sample response).
Thermomechanometry includes several variations according to the force and the way the force is applied.
Static force TM (sf-TM) is when the applied force is constant; previously called TMA with TD as the special case of zero force.
Dynamic force TM (df-TM) is when the force is changed as for the case of a typical stress–strain analysis; previously called TMA with the term dynamic meaning any alteration of the variable with time, and not to be confused with dynamic mechanical analysis (DMA).
Modulated force TM (mf-TM) is when the force is changed with a frequency and amplitude; previously called DMA. The term modulated is a special variant of dynamic, used to be consistent with modulated temperature differential scanning calorimetry (mt-DSC) and other situations when a variable is imposed in a cyclic manner.
Mechanical testing seeks to measure mechanical properties of materials using various test specimen and fixture geometries using a range of probe types.
Measurement is desired to take place with minimal disturbance of the material being measured. Some characteristics of a material can be measured without disturbance, such as dimensions, mass, volume, density. However, measurement of mechanical properties normally involves disturbance of the system being measured.
...
Wikipedia