Temco D-16
| Temco D-16 | |
|---|---|
_D-16_Twin_Navion.jpg) |
|
| Temco D-16A | |
| Role | Business & touring aircraft |
| Manufacturer | Temco Aircraft |
| First flight | 1952 |
| Introduction | 1953 |
| Produced | 1953-1957 |
| Number built | 110 |
| Developed from | Ryan Navion |
The Temco D-16 is a 1950s twin engine civil aircraft from the United States. It was produced by conversion of a Ryan Navion to replace its single engine with two wing-mounted engines. It is commonly known as the Twin Navion, although that name is also often applied to a later similar conversion, the Camair 480.
The project began in 1951 as a requirement by Charles Daubenberger for an inexpensive replacement for the corporate Ryan Navion operated by his Dauby Equipment Company, to achieve better reliability while crossing high mountain ranges. He commissioned Roger Keeney of the Acme Aircraft Company to provide a solution, that evolved into a twin engine conversion of a Navion.
Jack Riley Sr. built the first model with a team of four. With encouragement from Lycoming, the 125 hp Lycoming O-290 four-cylinder engine was selected for the project. Design changes from the basic Navion structure included strengthened wing spars, that supported engine mounts and other components from Piper PA-18 Super Cub, plus new engine nacelles, a faired nose section that replaced the existing engine and cowling, and a new vertical tail and rudder based on the existing horizontal stabilizer. During testing in 1952, the aircraft was initially named the X-16 Bi-Navion. On 10 November 1952, it was granted certification by the Civil Aeronautics Administration (CAA), after which it was renamed as the D-16 Twin Navion.
A second aircraft was converted for Jack Riley, who specified 140 hp engines, and he purchased the production rights from Dauby. Riley Aircraft then started production of the Riley D-16 Twin Navion, that standardized the design with 150 hp Lycoming O-320 engines and other improvements. In March 1953, after 19 conversions had been carried out, Riley subcontracted production to Temco Aircraft. Temco then purchased the sole production rights, and produced a further 46 conversions under the name Temco D-16. In September 1954, the design was upgraded to include 170 hp Lycoming O-340 engines plus increased fuel capacity in wingtip tanks, officially named Temco D-16A but typically marketed as the Riley 55 for the 1955 model year.
...
Wikipedia