*** Welcome to piglix ***

Tektronix 4014


The Tektronix 4010 series was a family of text and graphics computer terminals based on the company's storage tube technology. There were several members of the family introduced through the 1970s, the best known being the 11-inch 4010 and 19-inch 4014, along with the less popular 25-inch 4016. They were widely used in the CAD market in the 1970s and early 1980s.

The 4000 series were much less expensive than earlier graphics terminals, such as the IBM 2250, because no additional electronics were needed to maintain the display on the screen. They remained popular until the introduction of inexpensive graphics workstations in the 1980s. The new graphics workstations used raster displays and dedicated screen buffers that became more affordable as solid state memory chips became cheaper.

The Tektronix direct-view storage tube was first used in the Tektronix 564 oscilloscope in 1963, and was first used for non-oscilloscope applications in the 601 monitor in 1968. A number of graphics terminals based on this tube and others from the 600-series were developed, including the Advanced Remote Display Station from MIT's Project MAC, and the KV8I (later, KV8E) from Digital Equipment Corporation using the 11-inch diagonal 611. These consisted of just the tube and related basic electronics, it was up to software on the host computer to produce a display by driving the controls directly.

Tektronix decided to enter the terminal market themselves, introducing the 4002 in 1969, and the updated 4002A in 1971. The latter sold for $9,400 in 1973, or $9,550 with a customized host adaptor. These were similar to the earlier 3rd party terminals, essentially combining one of their storage tubes with the circuitry needed to decode instructions from the host and turn those into control inputs. However, the 4002s had the unique feature that only a portion of the screen was a storage tube, with a small section set aside for normal refresh-based drawing. This area was used for status messages and entering commands. As they did not include raster scan hardware or any form of memory, refreshing this area rapidly enough to reduce flicker was up to the host computer.


...
Wikipedia

...