*** Welcome to piglix ***

Tasmanian Government Railways M class (1952)

Tasmanian Government Railways M class
TGR M Class.jpg
Type and origin
Power type Steam
Builder Robert Stephenson and Hawthorns
Serial number 7421-7430
Build date 1951
Total produced 10
Rebuilder Tasmanian Government Railways, Inveresk
Rebuild date 1957
Number rebuilt 4 (MA class)
Specifications
Configuration:
 • Whyte 4-6-2
Gauge 1,067 mm (3 ft 6 in)
Leading dia. 2 ft 2.5 in (0.673 m)
Driver dia. M: 4 ft 7 in (1,397 mm)
MA: M: 4 ft 0 in (1,219 mm)
Trailing dia. 2 ft 4 12 in (0.724 m)
Length 59 ft 2 34 in (18.053 m)
Axle load
  • Loco: 10.20 long tons (10.4 t)
  • Tender: 10.60 long tons (10.8 t)
Adhesive weight 37.25 long tons (37.8 t)
Loco weight 54.20 long tons (55.1 t)
Tender weight 42.40 long tons (43.1 t)
Fuel type Coal
Fuel capacity 6 long tons (6.1 t)
Water cap 4,000 imp gal (18,184.4 L)
Firebox:
 • Firegrate area
23.1 sq ft (2.146 m2)
Boiler pressure 180 lbf/in2 (1.24 MPa)
Heating surface:
 • Tubes
601 sq ft (55.8 m2)
 • Flues 371 sq ft (34.5 m2)
 • Firebox 371 sq ft (34.5 m2)
Superheater:
 • Type 18 element
 • Heating area 371 sq ft (34.5 m2)
Cylinders 2 outside
Cylinder size 16 in × 24 in (406 mm × 610 mm)
Performance figures
Tractive effort 27,090 lbf (120.50 kN)
Factor of adh. 3.98
Career
Operators Tasmanian Government Railways
Numbers M1-M10
Disposition all preserved
Type and origin
Power type Steam
Builder Robert Stephenson and Hawthorns
Serial number 7421-7430
Build date 1951
Total produced 10
Rebuilder Tasmanian Government Railways, Inveresk
Rebuild date 1957
Number rebuilt 4 (MA class)
Specifications
Configuration:
 • Whyte 4-6-2
Gauge 1,067 mm (3 ft 6 in)
Leading dia. 2 ft 2.5 in (0.673 m)
Driver dia. M: 4 ft 7 in (1,397 mm)
MA: M: 4 ft 0 in (1,219 mm)
Trailing dia. 2 ft 4 12 in (0.724 m)
Length 59 ft 2 34 in (18.053 m)
Axle load
  • Loco: 10.20 long tons (10.4 t)
  • Tender: 10.60 long tons (10.8 t)
Adhesive weight 37.25 long tons (37.8 t)
Loco weight 54.20 long tons (55.1 t)
Tender weight 42.40 long tons (43.1 t)
Fuel type Coal
Fuel capacity 6 long tons (6.1 t)
Water cap 4,000 imp gal (18,184.4 L)
Firebox:
 • Firegrate area
23.1 sq ft (2.146 m2)
Boiler pressure 180 lbf/in2 (1.24 MPa)
Heating surface:
 • Tubes
601 sq ft (55.8 m2)
 • Flues 371 sq ft (34.5 m2)
 • Firebox 371 sq ft (34.5 m2)
Superheater:
 • Type 18 element
 • Heating area 371 sq ft (34.5 m2)
Cylinders 2 outside
Cylinder size 16 in × 24 in (406 mm × 610 mm)
Performance figures
Tractive effort 27,090 lbf (120.50 kN)
Factor of adh. 3.98
Career
Operators Tasmanian Government Railways
Numbers M1-M10
Disposition all preserved

The Tasmanian Government Railways M class was a class of 4-6-2 steam locomotives operated by the Tasmanian Government Railways.

On 12 March 1952, the Tasmanian Government Railways (TGR) took delivery of 10 M class branch line locomotives from Robert Stephenson and Hawthorns, Newcastle-upon-Tyne. The locomotives were similar to the Indian Railways YB class.

They were allocated to operate on the North-Eastern and Western lines and at Hobart. However with the TGR having already commenced dieselisation with the X class, some of the lines intended for M class operation had already been converted. Hence in 1957, four were fitted with smaller driving wheels recovered from withdrawn Australian Standard Garratts enabling them to operate heavier trains over the steeply graded North-Eastern line.

As they fell due for overhaul, they were withdrawn from 1960 with the last removed from traffic in 1975.

All members of the class have been preserved to an extent, with four locomotives seeing further use on heritage trains.

The M class designation was previously used by the M class, the last of which was withdrawn in 1931.


...
Wikipedia

...