TGR K Class

Tasmanian Government Railways K class

Works photograph of K1

Type and origin Power type Steam Builder Beyer, Peacock & Co Serial number 5292, 5293 Build date 1909 Total produced 2

Specifications Configuration: ​  • Whyte 0-4-0+0-4-0T Gauge 2 ft (610 mm) Driver dia. 2 ft 7 1⁄2 in (800 mm) Wheelbase 26 ft 9 in (8,153 mm) overall 4 ft (1,219 mm) Length 32 ft 2 in (9,800 mm) Loco weight 33.5 long tons (34.0 t; 37.5 short tons) Fuel type Coal or Oil Tender cap. 840 imp gal (3,800 l; 1,010 US gal) Firebox:  • Firegrate area 14.8 sq ft (1.37 m2) Boiler pressure 195 psi (13.4 bar; 1,340 kPa) Heating surface 628 sq ft (58.3 m2)  • Tubes 568 sq ft (52.8 m2)  • Firebox 60 sq ft (5.6 m2) Cylinder size 14.5 in × 20 in (368 mm × 508 mm) High-pressure cylinder 11 in × 16 in (279 mm × 406 mm) Low-pressure cylinder 17 in × 16 in (432 mm × 406 mm) Valve gear Walschaerts

Performance figures Tractive effort 12,507 lbf (55.63 kN)

Career Operators Tasmanian Government Railways Numbers K1-K2 Preserved K1 Disposition 1 preserved, 1 scrapped

The Tasmanian Government Railways K class was a class of 0-4-0+0-4-0 Garratt steam locomotives operated by the Tasmanian Government Railways. It was the first class of Garratt locomotives ever produced.

Although considered the first Garratt locomotives, they did in fact differ in two important details from Herbert Garratt's original concept. First: they are compound locomotives, with two high-pressure cylinders on the rear engine, and a pipe leading to two larger low-pressure cylinders on the front engine; second: both sets of cylinders were placed facing each other inside their engine units, rather than facing out as in all other Garratts. This was a problem on the rare warm days on the West Coast Range in Tasmania, as one pair of cylinders was under the cab, making the cab uncomfortably hot.

The North East Dundas Tramway on which they worked traversed some of the most rugged terrain in the world served by a railway at the time. It featured long stretches of 1-in-25 grades, high trestle bridges and 30-metre-radius reverse curves.

After the line closed in 1929, the boiler of K1 was sold to a sawmill, and in 1947 K1 was sold to its builder Beyer, Peacock & Co, with the boiler of K2 attached and repatriated back to England. Beyer, Peacock & Co closed in 1966, with K1 sold to the Ffestiniog Railway. However K1 was too tall and wide for use within the restricted loading gauge, and after ten years of storage at Porthmadog, it was lent to the National Railway Museum (NRM), York where it was cosmetically restored.

As the Welsh Highland Railway rebuilding project reached fruition, K1's potential for the line was recognised and in 1995 it left the NRM. A new boiler was found to be required. Parts were restored at various locations, with K1 reassembled at Boston Lodge. After conversion to oil-firing, it steamed again in 2004 and finally received HM Railway Inspectorate approval in September 2006 to haul trains. It entered passenger service in October 2007.