Supermarine Scapa

Scapa
Role	Reconnaissance flying boat
Manufacturer	R.J. Mitchell
First flight	1932
Introduction	1935
Primary user	Royal Air Force
Number built	15
Developed from	Supermarine Southampton

The Supermarine Scapa was a British general reconnaissance flying boat built by Supermarine that was used by the Royal Air Force between 1935 and 1939. It was developed from the Southampton and formed the basis of the later Stranraer flying boat.

After experimenting with a three-engine design of flying boat, (the Nanuk/Solent/Southampton X), Supermarine's chief designer, R.J. Mitchell, decided that the good hydrodynamic design that had been developed in the twin-engined Southampton, would be the platform for the next aircraft.

A prototype designated the Southampton IV was built. It had a hull that performed even better in the tank tests. An Air Ministry Specification was received in November 1931. The test pilot Joseph "Mutt" Summers took the first flight on 8 July 1932. The name had then been changed to the Scapa.

15 Scapas were built before production was changed to a more powerful development, the Stranraer.

The Scapa hull was an all-metal structure. The wing and tail surfaces had metal structure with fabric covering. The engines were mounted in nacelles underslung from the upper wing, There were two fins, each placed at the mid semi-span of the tailplane. Similar to the Southampton, there were three gun positions provided, one in the nose and two staggered in the rear fuselage.

Sourced from

General characteristics

Performance

Armament

...
Wikipedia